none

94 RESULTS WITHIN AUSTRALIA
BEST MATCH FOR
HYDRAULICS & PNEUMATICS


Many cranes, forklifts, skid lifts and automation control systems depend on hydraulics, the applied field of utilizing the mechanical properties of liquids, and pneumatics, the applied field of utilizing the mechanical properties of pressurized gasses. Such systems tend to provide motive power in a safer, more reliable and more cost-effective way than many implementations of electric motors and actuators.

READ MORE

 

filter by

  1. Product characteristics By using bell housings motor and pump shaft are aligned to each other optimally   Material: cast iron - higher resistance compared to aluminium   Applicable in mining and offshore 

  2. Quick release couplings ISS/L. Screw type quick release IP. In line check valves. Quick release couplings ISS/PP. Swivel Joints GGN/GGL.

  3. By using bell housings motor and pump shaft are aligned to each other optimally. Material: plastics - housing with aluminium pump-mounting flange. Stable in dimensions in case of higher temperatures and humidity.

  4. Product characteristics Inserted heating cartridges with temperature control By external or internal setting (TA / TI) Thermostat to be set to 0 °C - 85 °C, 16 ampere Horizontal assembly of the heating cartridges Screw-in thread G 1 1/2”, G2

  5. D150 to D330 with patented locking. Use between bellhousing and pump. For the separation of structure-borne noise from pump to drive unit. Noise reduction by reflection of the structure-borne noise vibrations

  6. Product characteristics Cleaning covers V324 and V449 according to DIN 24339 Cleaning cover V530-12 for large tanks Material: Aluminium Profile sealing ring PRD made of Perbunan available from stock

  7. Inserted heating cartridges with temperature control . By external or internal setting (TA / TI). Thermostat to be set to 0 °C - 85 °C, 16 ampere Horizontal assembly of the heating cartridges.

  8. DTV for vertical assembly only   Separation of structure-borne noise between drive unit and tank   Type DT protected against separation (failsafe) by means of special design  

  9. Product characteristics Electrical level and temperature control Suitable for mineral oils Available with 1 or 2 level contacts and with 1 temperature probe Electrical switch:

  10. Tank heater with magnetic clamp. For direct assembly in the oil tank. To be mounted horizontally to the tank ground or vertically to the tank wall by means of the magnetic clamp.

Products
Suppliers