Long Caps


Made of tough, flexible vinyl, Long Caps are available in lengths up to 24" long.

Ideal for protecting long bolts or providing a clean finish to the end of a tube. Use our double dip process to achieve two-color or dual durometer parts.

Can be imprinted, punched or sliced to your specifications.

Wide Selection of Long Caps:

Products come in a wide variety of colors, hardnesses and surface finishes. Many sizes are available in "heavy-weight" wall thickness for maximum protection.

Applications of Long Caps:

  • Thread protectors
  • Tubing end protectors
  • Cable end seals
  • Masks (for painting, plating, powder coating, shot blasting)
  • Insulators

Style of Long Caps: Available with Round End or Flat End tops.

ID of Long Caps: Long Caps should typically be sized to match the O.D. (outside diameter) of your part. Examples: If your O.D. is .625" (15.88 mm), use a .625" (15.88 mm) Long Cap.

For a tighter fit, choose a smaller diameter. Smaller diameter caps can be applied more easily by using soapy water or heating the parts to make them more pliable.

Length of Long Caps: All Long Caps are available in any length up to the maximum shown, within .062" (1.57 mm) increments. On Round End caps, the inside length tolerance of ± .062" (1.57 mm) is measured to the center of the closed end.

On Flat End caps, the inside length tolerance of ± .062" (1.57 mm) is measured along the side wall to the radius of the closed end, not down the center.

Wall thickness of Long Caps: Wall Thickness "C" is measured .250" (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010" (0.25 mm).

Materials of Long Caps: Numerous materials are available. Our most common material is a 75 durometer PVC with a glossy finish. See material chart for specifications.

Standard Colors of Long Caps: Black, Red, White, Blue, Green, Orange, Yellow, Gray. Numerous other colors available.