Grab Tab Caps


Ergonomically designed Grab Tabs have a user friendly bowed surface that reduces the amount of pinching pressure required for quick and easy removal and installation. Caps go on snug and stay put for a superior seal.

Applications of Grab Tab Caps:

  • Paint masks
  • Shipping and storage protectors
  • Thread protectors
  • Tubing end protectors

ID of Grab Tab Caps: Because Grab Tab Caps are soft and flexible, most sizes are available in an undersized diameter that will provide a tight fit on a standard tube or bar.

Length of Grab Tab Caps: Grab Tab Caps are available in any length, in .062" (1.57 mm) increments. Minimum length is .187" (4.75mm).

Maximum length is stated in chart. Inside length tolerance is ± .062" (1.57 mm). Inside length is measured along the side wall to the radius of the closed end, not down the center.

Wall thickness of Grab Tab Caps: Wall Thickness "C" is measured .250" (6.35 mm) from the open end, increasing slightly toward the closed end. Wall tolerance is ±.010" (0.25 mm).

Materials of Grab Tab Caps: Numerous materials are available. Our most common material is a 75 durometer PVC with a glossy finish. See material chart for specifications.

Standard Colors of Grab Tab Caps: Black, Red, White, Blue, Green, Orange, Yellow, Gray. Numerous other colors available.