ErgoStrap

01-01-1970

ErgoStrap 713X / 726X / 745X – X-pert Line.

The X-pert Line sets the new benchmark with advanced electronics and newly designed touchscreens on the sealing head and
the strapping system, stregthening the intuitive user interface. X-pert Line also sets new ergonomic standards.

Standard equipment

Elegant operation via touchscreen and joystick with intuitive user guidance
Fully integrated sealing head with touchscreen and ergonomically shaped controls
Tool-Lift counterbalances the operation of sealing head
Easy going and comfortable handling with ergonomically shaped handles
Fully covered for increased working safety in classy design

Special equipment

Headpiece with bumper: For strapping pallets with lateral overlappings up to 40mm, e.g. cardboard covers or uneven side surfaces.
Line Laser: The Line Laser indicates the distance and the alignment of the machine to the pallet, which simplifies the positioning of the machine in front of the pallet.
Reversing sledge:
Reversing sledge 85S (only available for E-conomy Line): Slimmer version of the standard sledge. Minimum clearance width: 160 mm, instead of 185 mm in standard equipment.
Reversing sledge 47: (available for X-pert Line and E-conomy Line) Narrower version of the standard sledge. Minimum clearance height: 47 mm, instead of 87 mm in standard equipment.
Reversing sledge 47S: (available for X-pert Line and E-conomy Line) Slimmer version of the reversing sledge 47. Minimum clearance width: 160 mm, instead of 185 mm in standard equipment.
Triplex-Tool-Lift: The Triplex–Tool–Lift enables tensioning and sealing not only on the side of a pallet (side sealing), but also on the top (top sealing) without removing the sealing head from the Triplex–Tool–Lift. Minimum pallet height for side sealing is 760 mm. Maximum pallet height for top sealing is 780 mm. Minimum pallet height for top sealing is 100 mm.
Sealing head removable from the Triplex–Tool–Lift: If the strap needs to be tensioned and sealed in positions which cannot be reached by the Triplex–Tool–Lift, e.g. inside a mesh transport box or for horizontal strapping. By pulling a bolt, the sealing head can be removed and the strap can be tensioned and welded in any position.
Strap brake relief: The brake resistance of the strap coil can be reduced to 20% by simply pushing a foot pedal. Manually pulling out strap is a lot easier, especially for pallets of 1.2 m and higher.

CONTACT COMPANY

CONTACT DETAILS

PROJECT DETAILS

RELATED PRODUCTS