CL-410 - Centre Lathe (415V) 410 x 1000mm (L600D)

By Hare & Forbes Machineryhouse

Order Code: L600D
CL-410 - Centre Lathe (415V)
410 x 1000mm
Includes Digital Readout, Quick Change & Toolpost

  • 2 axis digital readout system
  • Quick change toolpost
  • Triple bearings supporting headstock spindle
  • Adjustable taper roller bearings providing spindle accuracy
  • Precision 'V'-beds & headstock gears are all hardened & ground
  • One piece cast iron base increases rigidity
  • Overload protection on drive motor and coolant system
  • Universal enclosed gearbox incorporating metric & imperial thread capabilities
  • Inching button incorporated on the control panel for convenient spindle speed selection
  • Foot operated spindle brake with safety cut out switch
  • 300mm wide induction hardened heavy duty cast iron bed
  • Removable gap bed allowing work piece to swing up to 640mm
  • Chuck guard fitted with safety micro switch
  • Powered longitudinal and cross feeds
  • Adjustable 4 position length-stop mechanism for accurate repetitive operation
  • Micro adjustable saddle stop
  • Dual calibrated dials incorporating metric & imperial graduations
  • Coolant system with flexible hose enabling operator to manipulate flow direction
  • Oil sight glass for head stock and gearbox
  • Low voltage halogen work light
  • Lubrication pump on saddle oiling slides
  • D1-6 camlock spindle for quick chuck removal
  • 12 spindle speeds from 25-2000rpm
  • Large 58mm spindle bore
  • 5.5kW / 7.5HP 415V main motor
  • 2 axis digital readout system
  • Quick change toolpost
  • 200mm 3-jaw chuck with reverse jaws
  • 250mm 4-jaw chuck
  • Faceplate
  • Fixed Steady with roller bearings
  • Travelling steady with roller bearings
  • Dead centres
  • Thread chasing dial
  • Foot brake
  • Coolant system
  • Work light
  • Rear splash guard
  • Spindle reducing bush
Model: CL-410
Digital Readout System Fitted:
Quick Change Toolpost Fitted:
Coolant System:
Tool Height To Suit: 25mm
Distance Between Centres: 1000mm
Swing Over Bed: 410mm
Swing Over Cross-slide: 224mm
Swing In Gap: 640mm
Centre Height: 205mm
Spindle Bore: 58mm
Spindle Nose Size or Type: D1-6 Camlock
Bed Width: 300mm
Headstock Spindle Taper: 6MT
Tailstock Taper: 4MT
Cross Slide Travel: 290mm
Compound Slide Travel: 128mm
Leadscrew: Metric
Cross Feed Range (X-Axis): 0.014-0.784mm/rev
Longitudinal Feed Range (Z-Axis): 0.031-1.70mm/rev
Metric Thread Steps & Pitch Range: 41 (0.1-14mm)
Imperial Thread Steps & TPI Range: 60 (2-112TPI)
3 Jaw Chuck Diameter: 200mm
4 Jaw Chuck Diameter: 250mm
Spindle Steps / Speed Range: 12 (25-2000rpm)
Motor Power: 5.5kW / 7.5hp
Voltage: 415V
Weight (nett): 2000kg