19 °C
Germantown, Maryland

Wed Jun 26 2019

TM-1960G - Centre Lathe (415V) 480 x 1500mm - 78mm Bore (L634D)

By Hare & Forbes Machineryhouse

Order Code: L634D
TM-1960G - Centre Lathe (415V)
480 x 1500mm - 80mm Bore
Includes Digital Readout System

Manufactured in Taiwan
  • 2 Axis digital readout system
  • Triple bearings supporting headstock spindle
  • Adjustable taper roller bearings providing spindle accuracy
  • Precision 'V'-beds & headstock gears are all hardened & ground
  • High quality one-piece Meehanite cast base increases rigidity
  • 300mm wide induction hardened heavy duty cast iron bed
  • Universal enclosed gearbox incorporating metric & imperial thread capabilities
  • Inching button incorporated on the control panel for convenient spindle speed selection
  • Overload protection on drive motor and coolant system
  • Foot operated spindle brake with safety cut out switch
  • Removable gap bed allowing work piece to swing up to 650mm
  • Powered longitudinal and cross feeds
  • Adjustable 4 position length-stop mechanism for accurate repetitive operation
  • Dual calibrated dials incorporating metric & imperial graduations
  • Coolant system with flexible hose enabling operator to manipulate flow direction
  • Low voltage halogen work light
  • Oil sight glass for head stock, gearbox and apron
  • Lubrication pump on saddle oiling slides
  • D1-8 camlock spindle for quick chuck removal
  • 12 Spindle speeds from 40 - 2000rpm
  • Large 78mm spindle bore
  • 5.5kW / 7.5HP 415V main motor
  • 2 Axis digital readout system
  • 275mm 3-jaw chuck with reverse jaws
  • 320mm 4-jaw chuck
  • 356mm face plate
  • Fixed steady with roller bearings
  • Travelling steady with roller bearings
  • 4-position knock out feed system
  • Dead centres
  • Thread chasing dial
  • Foot brake
  • Coolant system
  • Work light
  • Rear splash guard
  • Spindle reducing bush
  • Instruction booklet
Model: TM-1960G
Digital Readout System Fitted:
Quick Change Toolpost Fitted: Optional
Coolant System:
Tool Height To Suit: 25mm
Distance Between Centres: 1500mm
Swing Over Bed: 480mm
Swing Over Cross-slide: 275mm
Swing In Gap: 690mm
Centre Height: 240mm
Spindle Bore: 80mm
Spindle Nose Size or Type: D1-8 Camlock
Bed Width: 300mm
Headstock Spindle Taper: 7MT
Tailstock Taper: 4MT
Cross Slide Travel: 250mm
Compound Slide Travel: 125mm
Leadscrew: Metric
Cross Feed Range (X-Axis): 0.02-0.4mm/rev
Longitudinal Feed Range (Z-Axis): 0.05-0.82mm/rev
Metric Thread Steps & Pitch Range: 17 (0.5-7mm)
Imperial Thread Steps & TPI Range: 39 (4-56TPI)
3 Jaw Chuck Diameter: 275mm
4 Jaw Chuck Diameter: 320mm
Spindle Steps / Speed Range: 12 (40-2000rpm)
Motor Power: 5.5kW / 7.5hp
Voltage: 415V
Weight (nett): 2250kg