CGB Precision Products - Metric, Self-lubricating High Performance Rod-ends and Spherical Bearings.
Established in 1973 the Fluro Company of Germany can offer a range of self-lubricated, high performance rod-end and spherical bearings designed for the race car and motor-cycle industry.
With balls made from hard chrome plated bearing steel, outer races from AISI 303 stainless steel, and rod end housings from high strength alloyed steel, nickel plated and polished, Fluro offer high performance rod ends that look good as well as perform.
The MS-Series of rod-end and spherical bearings have a tighter than normal fit and are used in Formula 3 racing cars in Europe and the UK.
Fluro have also developed a new prototype rod-end which was successfully tested by Renault Alpine for 25,000 road kilometres with no increase in internal play.
Working closely with Martin Hohn (a precision machining company), Fluro can offer solutions to customer designs with special linkages, couplings, different shaft lengths etc.
Additional Products From FLURO
Angle Joints to DIN 71802 consisting of ball stud and ball journal.
Fork Heads to DIN 71752 and Fork Ball Joints to DIN71751 with ES-Bolt (clevis spring pin) or cotter bolt. For use to transmit linear movements.
Spherical Plain Thrust Bearings, steel on steel, maintenance free for axial loads.
Hydraulic Rod Ends to DIN24555/ISO 8133, DIN24338/ISO 6982,threaded or welded base, bore sizes 12mm to 200mm.
Rubber Seals, for protection against dust, chemical substances and aggressive environments, resistant to oil, grease saltwater.
Rod Ends/Spherical Plain Bearings with high corrosion resistance, for use in marine and high corrosive environments.