HM-52GV Turret Milling Machine Inverter Variable Speed & Geared Head - Horizontal & Vertical (M578)

By Hare & Forbes Machineryhouse

Turret Milling Machine
Inverter Variable Speed & Geared Head
Horizontal & Vertical  (X) 600mm (Y) 200mm (Z) 310mm
Includes Digital Readout, Vice & Collet Chuck System

"A well-built entry level inverter variable speed & geared head, turret milling, vertical and horizontal, drilling machine with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. The hi-low geared head selector mounted on right side of milling head allows for quick change off speed range.

Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage work light, 150mm machine vice, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 1' & 1-1/4' horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.

Extra Features:
Swivel table
1' & 1-1/4' horizontal arbors

- 3 Axis digital readout system
- Inverter variable speed & geared head for vertical spindle speeds
- Swivel table left & right with graduated scale
- Mill head tilts to ±45º left to right
- 300mm horizontally sliding and rotating ram
- NT30 Horizontal and vertical spindles that are hardened and ground
- Precision-ground dovetail slide-ways and table
- Precision milling table incorporating machined T slots
- Rear concertina slide-way cover
- Forward and reverse on/off switch
- Fine hand wheel operated quill feed
- Swarf & splash tray
- Spindle lock for quill
- Metric dial graduations @ 0.02mm for X , Y & Z-Axis
- Vertical dial graduations on hand wheel @ 0.05mm
- All slides utilise dovetail construction for maximum rigidity
- Includes 1' & 1-1/4' arbors for the horizontal spindle
- * Note: X & Y travels maybe reduced due to digital readout scales and safety stops
- * Note: Optional Y & Z power feeds require additional parts & fitting (not included)

- 3 Axis digital readout system
- Inverter variable speed on vertical spindle
- X-Axis power-feed
- Safety cutter guard
- Swarf tray
- Coolant system
- Halogen lamp
- 150mm machine vice
- Drill chuck & arbor
- 2 & 3MT adaptors
- Boring bar arbor
- 8-piece metric collet chuck set (4-16mm)


Model: HM-52GV
Digital Readout: 3-Axis Digital Readout
Type: Vertical & Horizontal
Table Size: 1000 x 240mm
Spindle Taper - Vertical: NT30
Spindle Taper - Horizontal: NT30
Longitudinal Travel (X-Axis): 600mm *
Cross Travel (Y-Axis): 175mm *
Vertical Travel (Z-Axis): 310mm
Type of Slides: Dovetail
Ram Travel: 300mm
Spindle to Table: 390mm
Quill Travel / Diameter: 120mm / 90mm
Throat Depth (max.): 500mm
Tilting Head (Left ~ Right): ±45º
Tilting Head (Forward ~ Back): Fixed
Drilling Capacity: 30mm
End Milling Capacity: 25mm
Face Milling Capacity: 80mm
Power Feed - Quill: Manual
Power Feed - Longitudinal (X-Axis): 20 - 2000 mm/min
Power Feed - Cross (Y-Axis): Optional *
Power Feed - Vertical (Z-Axis): Optional *
Table T-Slot Size: 14mm
Work Table Load Capacity: 175kg
Spindle Speeds Vertical (steps/rpm): Variable (80-1600rpm)
Spindle Speeds Horizontal (steps/rpm): 9 (60-1370rpm)
Motor Power - Vertical: 1.5kW / 2hp
Motor Power - Horizontal: 1.5kW / 2hp
Motor Voltage: 240V
Overall Height: 2080mm
Weight (nett): 1050kg"