Light rain showers
24 °C
Germantown, Maryland
Light rain showers

Mon Aug 20 2018
none

Spitwater Industrial Vacuum Cleaners - DM35SGA

By Spitwater
  • Spitwater Industrial Vacuum Cleaners - DM35SGA

Suction unit

The suction is provided by two by-pass motors, using carbon brushes, operated by independent switches and placed inside a sturdy steel casing .

The motor head is filled with noise reducing material, in order to limit as much as possible the level of noise, and designed in order to convey the exhaust air towards the ground, so as not to bother the user and not to raise possible dust in the neighbouring area.

The control board includes the three independent switches and a vacuum indicator, useful to detect possible clogging of the filter. Two handles placed on the sides enable an easy lifting and removal of the motor head, for possible inspection or replacement of the underlying filter.

Filter unit

The filter is placed and protected inside the steel filter chamber; the filter is made of polyester, tailored with pockets in order to increase the filter surface (20.000 cm2), and has a high filtration efficiency (3 micron).

A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine.

The frontal aluminium die-cast suction inlet (Ø80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material (the latter only within the capacity of the container), with no need to change or take out the filter.

Collection unit

The vacuumed material is placed inside a drop-down bin mounted on wheels (50 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag.

The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes; all metal parts of the vacuum are epoxy painted.

 

MODEL   D/M35 SGA
Tension
Volt
HZ
230 (110) /
50-60
By-pass motors
N
2 (single phase)
Power
AMP
9.5
Max. Vacuum rate*
mm.H2O
2.300
Max. Air flow rate**
M3/h
400
Filter surface (pocket filter)
Cm2
20,000
Filter efficiency
CAT (BIA) / micron
L / G
3
Air load on filter
M3/M2/h
200
Capacity
Lt
50
Suction inlet
80
Noise level
dB(A)
78
Insulation
CL
1
Dimensions
cm
50x60
Height
cm
125
Weight
Kg
65
* Measured with fully closed suction inlet
** Measured with fully open suction inlet