Partly cloudy
4 °C
Germantown, Maryland
Partly cloudy

Fri Oct 19 2018
none

Spitwater Industrial Vacuum Cleaners - DM35

By Spitwater
  • Spitwater Industrial Vacuum Cleaners - DM35

Main Features

  • The vacuum cleaner DM35 WD is powered by two by-pass motors, carbon brush type, providing a rapid cooling of the motor in case of overheating. The motors are installed inside a sturdy steel casing; special noise buffers reduce the noise within the safety standards of work. A vacuum indicator enables to detect possible filter clogging or anomalies in suction.
  • The aluminium die-cast suction inlet has ? 80mm., and can be used with hoses ranging from 80 to 40 mm.
  • The dust kit is made by a bag type filter, made up by a polyester filter on the inside, providing a good filtration (3 micron efficiency (cat. G),.
  • The wet kit is made up by a floating device, protecting the motor against damage from liquids, foam and solid objects.
  • A 120 lt. container enables to dispose easily of the sucked up liquid, by means of a drain valve placed on the bottom of the container;
  • The frame is made of epoxidic painted steel and mounted on four wheels, two of them rotating and one with brake.

Optionals

  • AISI 304 Stainless steel container

 

MODEL   DM35
Tension
Volt
HZ
110 or 230
50/60
Single phase motors
N
2
Power
AMP
9.5
Max. Vacuum rate*
mm.H2O
2.300
Max. Air flow rate**
M3/h
300
Filter surface (pocket filter)
Cm2
8,000
Filter efficiency
CAT (BIA) / micron
L / G
3
Capacity
Lt
120
Floating Device  
Standard
Suction inlet
80
Noise level
dB(A)
74
Dimensions
cm
50x60
Height
cm
105
Weight
Kg
40
Liquid Discharge
Manual
Discharge Value
* Measured with fully closed suction inlet
** Measured with fully open suction inlet