Partly cloudy
4 °C
Germantown, Maryland
Partly cloudy

Sun Dec 16 2018
none

Spitwater Industrial Vacuum Cleaners - D/G60

By Spitwater
  • Spitwater Industrial Vacuum Cleaners - D/G60

Suction unit

The suction is provided by a suction unit of the side channel blower type, manufactured in Germany by Rietschle, with direct coupling between the fan and the motor shaft and no transmission system. It is thus completely maintenance free, fit for round-the-clock 24 hours duty, very silent and provides outstanding suction performances; a safety thermic switch cuts off the motor in case of overheating.

The control board is placed in a safe position at the back, and include two independent ON and OFF switches (protection IP65), a safety emergency stop button and a soft start device. A safety filter cartridge, placed between the motor and the main filter, protects the motor from contact with dust in case of dust accidentally passing through the main filter; a vacuum indicator enables constant checking of the suction performance, and detecting possible clogging of the filter.

Filter unit

The filter is placed and protected inside the steel filter chamber; the filter is made of polyester, tailored with pockets in order to increase the filter surface (30.000 cm2), and has a high filtration efficiency (3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The tangential aluminium die-cast suction inlet (Ø100 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material (the latter only within the capacity of the container), with no need to change or take out the filter. A cyclone welded inside the filter chamber conveys most of the dust directly in the container, and protects the filter from cutting or tearing.

Collection unit

The vacuumed material is placed inside a drop-down bin mounted on wheels (100 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag.
The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes; all metal parts of the vacuum are epoxy painted.

 

MODEL   D/G60
Tension
Volt
HZ
230 / 400
50-60
Power
KW
HP
4
5.5
Max. Vacuum rate*
mm.H2O
5.000
Max. Air flow rate**
M3/h
500
Filter surface (pocket filter)
Cm2
30.000
Filter efficiency
CAT (BIA) / micron
G
3
Air load on filter
M3/M2/h
166
Capacity
Lt
100
Suction inlet
80
Noise level
dB(A)
74
Protection
IP
55
Isulation
CL
F
Dimensions
cm
64x103
Height
cm
170
Weight
Kg
160
* Measured with fully closed suction inlet
** Measured with fully open suction inlet