Clear sky
26 °C
Germantown, Maryland
Clear sky

18:00-00:00 Thu May 24 2018
none

DOUBLE COLUMN HEAVY DUTY SEMI-AUTOMATIC HORIZONTAL BANDSAWS

By 600 Machine Tools Australia
  • MEGA

DOUBLE COLUMN HEAVY DUTY SEMI-AUTOMATIC HORIZONTAL BANDSAWS
H·S SERIES
 
QUALITY DESIGN -
Skillful engineering and imaginative design give every MEGA Band Saw exceptional cutting capacity.
An excellent blade tensioning system and guides keep the blade aligned and under constant load at all times.
A hydraulically controlled cutting feed maintains a constant cutting rate regardless of the workpiece cross-section
A power-driven brush continually flushed by a cutting fluid spout keeps the blade and saw guides free of chips for smoother cutting
A quick approach and normal feed rate selector are equipped to cause the blade to quickly descend into position.
 
SAFETY DESIGN -
Every MEGA Band Saw is factory equipped with:
Safety and thermal overload switches
Well guarded blades and wheel covers.
Save Blade shuts off automatically when cutting is complete
Low voltage & zero voltage controls
A blade breakage sensor/motion detector provides automatic shutoff.
 
Precise digital counter for cut depth cutting.
Setting range from 0.1mm - 999.9mm (increment 0.10mm)
The machine will be stopped automatically after reaching set number
 
Hydraulic shuttle vise for stock feeding.
There is a hydraulic shuttle vise at the front of the machine for loading and unloading of the workpiece. While positioning the workpiece for cutting, the shuttle vise can be operated simultaneously or separately with motor and chain drive roller table.
 
Motor and chain drive roller table
There is a motor and chain drive roller table at the rear of the machine for loading and unloading the workpiece. While positioning the workpiece for cutting, the motor and chain drive roller table can be operated simultaneously or separately with Hydraulic shuttle vise.
 
Carbide guides with hydraulic control
Carbide guides and guide arm are hydraulically operated to ensure precise saw blade alignment, and easy operation for blade change.
 
Auto head-elevation after complete cut
There is a selector switch on the control panel for setting the Auto head-elevation. The operator can choose whether to let the machine stop at the bottom position or raising the saw to a preset height after finishing a cut.
 
Hydraulic blade tension control
During operation of the saw, the correct tension is automatically maintained.  The tension is reduced when the saw is shut-off.  This procedure greatly increases blade service life.
 
Power driven blade cleaning brush and coolant cleaning flush hose
The machine is equipped with power driven blade cleaning brush to ensure smooth cutting and there is a coolant cleaning flush hose for machine cleaning.
 
Idle wheel motion detector for blade jam/break shut-off
This device not only can protect the saw blade from damage if the blade overloads during cutting, but will also shutoff the machine if the blade should break.