Light rain showers
23 °C
Germantown, Maryland
Light rain showers

18:00-00:00 Tue May 22 2018
none

MEBAswing 260 DG / 320 G

By 600 Machine Tools Australia
  • MEBAswing 260 DG / 320 G
  • MEBA

MEBAswing 260 DG / 320 G
The smart choice for all bandsawing
 
MEBAswing 260 DG 
Standard equipment 
• Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. 
• Positive stops at 30° + 45° left and right hand 
• Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. 
• Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross section by hydraulic damping cylinder 
• Environmentally-friendly micro spray lubrication system 
• Chip box inside 
• Saw blade drive with end of cut stop 
• Precise saw blade carbide-roller guidance 
• Colour silver grey / blue grey (RAL 7001 / RAL 7031) 
• 1 bandsaw blade 4/6 tpi 
• Instruction manual and spare parts list on CD-ROM 
 
Additional standard equipment 
• Hydraulic lift up of saw frame 
 
MEBAswing 320 G / 320 G-H / 320 G-HSS 
Standard equipment 
• Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. 
• Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. 
• Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder 
• Complete coolant equipment with electro-pump 
• Chip box inside 
• Saw blade drive with end of cut stop 
• Combined precise saw blade carbide-roller guidance with saw blade brush 
• Colour silver grey / blue grey (RAL 7001 / RAL 7031) 
• 1 bandsaw blade 4/6 tpi 
• Instruction manual and spare parts list on CD-ROM
 
Additional standard equipment 320 G-H
• Hydraulic lifting of the saw frame, manual
 
Additional standard equipment 320 G-HSS 
• MEBA – Power-Package „HSS“ 
  • Hydraulic lifting (H) and lowering (S) of the saw frame 
  • Hydraulic clamping (S) of the material 
  • Stepless, hydraulic cutting pressure and feed regulator 
  • Display of lowering speed via scale 
  • Display of cutting pressure via manometer 
  • Rapid lowering of the saw frame via button until material edge
 
• Frequency regulated AC-drive 15-150 m/min, 3 kW 
• Hydraulic material clamping via full-stroke clamp