Norman G. Clark Announces:
The Norman G. Clark Tilt Switch
The Norman G. Clark Tilt Switch is an innovative device which can be used either with a Flight Systems Engine Saver (available from Norman G. Clark), or as a stand alone switch. The switch activates once a vehicle has reached a 70 degree tilt to the vertical in any direction. The switch action is irrevocable and connects to an audible alarm after a variable delay period. A 24 volt signal is then directed to the engine shutdown solenoid.
The Tilt Switch is designed to protect an incapacitated operator by shutting down the engine in the event of a vehicle roll-over or should the vehicle tilt beyond its normal operating attitude.
Tilt Switches are fitted in mining and construction equipment where machinery may be working on uneven or unstable ground.
Let Norman G. Clark be your choice of Tilt Switches for today,
The switch has the ability to activate an audible alarm (a visual signal can be added) and shut down the engine whenever the machine tilts beyond an angle of 70° to the vertical in any direction (this can be changed to suit a customer’s individual requirements).
Once the machine passes the desired tilt angle, an alarm a delay timer will then be triggered (delay time may be set up to 60 seconds). When the set delay time has elapsed (factory set to 30 seconds), a 24V DC output signal is generated, enabling the operating machine to shut-off. The relay contact time response is a remarkable 15 milliseconds; which is critical to most safety applications.
- The product can handle heavy power loads (rated current at 10A).
- A military style connector (MSC) type is used to enable harsh environment operations.
- A test switch is mounted on the enclosure.
- The enclosure casing is designed to meet strict automotive requirements for protection against dust, dirt, oil and water.
A Steel ball inside the tilt sensor body is a “bridging point”; it allows contact between copper ring and copper plate which is wired as a triggering switch.