none

ZINC AEROSOLS PROVIDE SIMPLE CORROSION PROTECTION

14-10-2019
by 
in 

CRC Industries Australia has expanded its range high-quality zinc aerosol products with ten new types. CRC Clear Zinc, CRC Prime It, CRC Prep It, CRC Etch It and six new CRC coloured zincs join CRC’s original Zinc It, Bright Zinc and Black coloured zinc products available direct from CRC Industries Australia and via stockists nationwide.

“The rusting process takes place when iron or steel is exposed to atmospheric oxygen in the presence of water. When this happens, the metal is degraded and forms ferric rust which is a red-brown compound and a real scourge for our customers,” says CRC Industries Australia Managing Director, Murray Walbran.

“Metallic zinc coating is universally accepted as the best method of rust prevention and we are proud to now offer a dramatically greater range of zinc products to our customers than ever before.

“CRC Zinc products can be used on structural steel, trailers, roofs, guard rails, welding seams, rivet holes, fencing, storage tank transformers, power generation equipment and much more and can also be used to touch up galvanized coatings.

“With a wide array of specialist zinc products now available, CRC Industries Australia is confident there is a CRC Zinc product for your specific application.”

CRC Clear Zinc’s advanced protective coating technology protects surfaces from chemical, environmental and ultraviolet damage preventing rust, oxidation, corrosion, staining, and fading for up to 27 months. It is available as a 400ml ready to use aerosol.

CRC Prime It red oxide primer is a single pack penetrating shop primer with high levels of anti-corrosive zinc complexes. It is formulated for the protection of structural steel and iron and can be applied over clean or lightly rusted surfaces.

CRC Prep It is a single pack, high build, easy-sanding metal primer with a grey finish. Formulated with anti-corrosive zinc complexes, it outlasts most high build primers by inhibiting corrosion and forms a quick-drying protective coating with excellent adhesion to bare metal.

CRC Etch It is a single pack etch primer for white and yellow metals with excellent adhesion to bare metal. It is formulated for etching and key-coating bare aluminium, stainless steel, brass, copper and galvanised metal surfaces and forms a tenacious key coat to provide adhesion for painting aluminium, stainless steel, brass, copper and galvanised iron.

The quick drying coating provided by CRC Coloured Zincs combines the superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a coloured satin finish in recognised safety colours. The new CRC Coloured Zincs – available in yellow, orange, red, blue, green and white – are available as 400ml ready to use aerosols and complement the existing ‘black’ coloured zinc.

CRC Industries
1800 224 227
www.crcind.com.au

Related news & editorials

  1. 24.11.2020
    24.11.2020
    by      In
    The highly anticipated Electronic Flow Controller is here.
    It’s different from the Cordis Pressure Controller, as the Flow Controller utilizes an extremely fast reacting mems technology sensor upstream of Clippard’s proportional valve.
    Adding the optional DR-2 Regulator for accurate and precise... Read More
  2. 24.11.2020
    24.11.2020
    by      In
    Backplane Systems Technology is proud to present Aplex’s APC-3072 and APC-3073 Rugged Aluminium Front Bezel Design In-Vehicle Panel PC Solution.
    The APC-3072 comes with Intel Atom E3845 and APC-3073 comes with Freescale ARM Cortex A9 i.MX6 Dual Lite processors.
    The aluminium front bezel design... Read More
  3. 24.11.2020
    24.11.2020
    by      In
    If you use spray bars as part of your operations, you’ll understand how time consuming and inconvenient it can be to unclog, clean and maintain the spray nozzles.
    This is about to change with the introduction of a new range of Mini Quick-Fit Nozzles, from Italian nozzle manufacturer PNR.
    The design... Read More
  4. All in one AI chip prototype
    18.11.2020
    18.11.2020
    by      In
    A prototype for a new all-in-one AI device has been developed which brings together into one chip;  artificial intelligence technology, with imaging, processing, machine learning and memory; powered by light.
    The researchers say the all-in-one AI chip is inspired by nature’s greatest computing... Read More