19 °C
Germantown, Maryland

Sun May 19 2019

Worker comfort brings greater safety and productivity

Worker comfort brings greater safety and productivity

Machinery can break down in extreme conditions so it only seems natural that employees might have cause to break down as well.

As summer temperatures escalate, comfort tends to take a nosedive, dragging productivity and safety along with it. By circulating workplace air with high volume, low speed (hvls) fans you can help to combat worker fatigue and productivity loss.

In this interview C. Jason Hollan, manager of systems engineering at big ass fans, answers some common questions regarding the benefits of air movement as a cost-effective solution to worker comfort and safety.

How does a facility manager determine the optimal comfort conditions for employees in a non-conditioned workplace?

The sensation of feeling comfortable is not just dependent on air temperature, although that is a strong contributing factor. Human thermal comfort takes into account numerous environmental factors including temperature, thermal radiation, humidity and air speed. Personal factors including metabolic rate and amount of clothing must also be considered.

Studies indicate an average 2 percent reduction in work performance per 1°C temperature rise when the temperature is above 25°C.

While this may not seem detrimental on an individual basis, this drop in employee productivity can add up to huge profit loss across a company.

How does elevated air speed provide comfort if not altering temperature?

When temperature and humidity rise, the body’s ability to cool itself decreases. As one might expect, reducing the amount of clothing to the extent possible will promote cooling. And while not typically an option in the manufacturing industry, reducing activity level helps as well. Perhaps the best solution, however, is applying gentle, non-disruptive, non-turbulent airflow from HVLS fans that promotes the body’s natural cooling process, helping to maintain occupant comfort even in hot and humid conditions.

How do HLVS fans work differently than typical small high speed fans?

Properly engineered HVLS fans take advantage of their immense size — not speed — to move massive amounts of air.

When the aerofoil length is doubled you’ve increased the surface area that those aerofoils sweep times four. As the size gets larger, the amount of air the fan moves increases at a much faster rate than the amount of power it takes to turn it. So, with all things being equal, a larger fan, up to 7.3m in diameter, becomes more efficient.

Additionally, AirFences installed along the aerofoil redirect air that would otherwise slide off and be lost. This technology increases efficiency while contributing to a 28 percent improvement in coverage area. With the correct size, number and placement of fans, thorough air movement is achieved, eliminating any dead spots or stagnant air that might otherwise exist in a facility.

How can this type of environment be maintained as summer temperatures rise?

In applications requiring cooling, fans operate between 60 and 100 percent of maximum speed during the summer months, improving comfort and productivity with an evaporative cooling effect mentioned above as well as the added effect of heat transfer – when skin temperature is warmer than air temperature. Although fans do not lower the temperature of a space, the perceived cooling effect can make a person feel up to 5°C cooler in non-air conditioned spaces.

How does air movement contribute to a more productive work environment?

If you’re in the industrial segment then you know the lifeblood of your business is productivity. Getting the most out of what you put in is the name of the game, and like a thief in the night, a hot, humid work environment can rob you of the very revenue you’ve worked so hard to resource.

Lost productivity is a double-edged sword – imagine a warehouse averaging 29°C during the four summer months. At 29°C, each employee loses 8.8 percent of their productivity – with 30 full-time employees at $20 per hour, $2000 is lost in weekly productivity. The total loss in productivity per summer comes to approximately $27,000 (not including the costs of inefficient cooling and worker comp claims due to heat stress). If air movement is incorporated into the space via HVLS fans, the warehouse will feel at least 5°C cooler – allowing the company to recover about two thirds of productivity lost without the fans.

How much energy is needed to run the fans and how much energy can I save?

Energy usage is dependent on the size and number of fans, horsepower of the motors, hours of operation per week.

With typical hours of operation during the summer months, a 4m-7m HVLS fan uses, on average, 7.1 to 11.6 kWh of energy on a daily basis, far less than an air conditioning system, and far more applicable in most warehouse facilities.

How can HVLS fans help to reduce heat stress?

Heat stress is defined as a group of conditions that result from being overly exposed to or overexertion in excessive ambient temperatures, a common occurrence in industrial spaces during the summer months.

A 7.3m diameter HVLS fans installed produces a column-shaped jet of air roughly equal to the diameter of the fans. As this jet strikes the floor it spreads out in all directions, displacing the stagnant air and setting up a convection-type circulation pattern. Air from the floor level is moved out towards the walls or obstructions and then moves up back into the fan to be recirculated.

HVLS fans provide up to a 5°C cooling effect, significantly reducing the heat stress on workers making their environment safer, more productive and more comfortable.

Related news & editorials

  1. 23.04.2019
    by      In
    Manufacturers in Australia and around the world are deploying tools that enable them to operate smarter, fuel productivity, deliver valuable insights and reduce costs. Powerful enterprise resource planning (ERP) solutions infused with business intelligence are giving manufacturers full insight into... Read More
  2. 12.04.2019
    by      In
    In the lead-up to the 2019 federal election, the Waste Management and Resource Recovery Association of Australia (WMRR) is calling for support from everyone – governments, industry and the community – for an “Australian Recycled Content” label to highlight and support the purchase and use of... Read More
  3. 29.01.2019
    by      In
    Robotic Automation turned 30 during 2018, and to mark then event, Laurence Marchini caught up with MD and founder Colin Wells to pick his brains on the state of Australian industry.
    Perhaps it’s one of those inevitable truths. But one of Australia’s most successful automation entrepreneurs... Read More
  4. 05.11.2018
    by      In
    Ross Grassick looks at the problems of pollution in the warehouse and how they can be overcome.
    The modern warehouse has become a lot more efficient. The higher speed of goods movement improves productivity, lowers costs and increases profits.
    With the streamlining of the supply chain, we are now... Read More