What happens when grease degradation sets in


Grease-lubricated bearings that are kept idle for long periods are subject to the effects of grease degradation and possible vibration damage. According to GreaseMax®, a leader in chemically operated lubrication, a lubricator controlled, slow-rate continuous lubrication will assist with these maintenance problems.

Problems that can occur with bearings that are idle over time include:

· Water contamination: Liquids, humidity and condensation inside the bearing housing caused by daily temperature cycles all result in the grease absorbing water. This will in turn cause a break-down of the oil's film strength, it will allow the on-set of corrosion, the grease additives will be degraded and bearing surface damage can occur due to hydrogen embrittlement. Note that daily temperature cycles can cause a build-up of condensation even in dry climates.

· Oil separation: This will vary between greases due to variations in the grease type and manufacturer's processes however if the base oil in the grease separates out from the grease thickener the grease will lose its lubrication properties. If the oil film separating the rolling surfaces degrades or is lost, vibration-caused damage will occur.

· Vibration damage: Sometimes only a portion of the plant will be shut down, so vibrations from the plant still running can be transmitted to the static plant, with damaging effects to the bearings, especially rolling element bearings, as oscillations drive lubricant out of the contacting bearing elements. A sufficient supply of grease should be maintained to keep a film on the bearing surfaces and to ensure that the grease forms a seal to exclude moisture.

Consideration should also be given to the maintenance of bearings in plants that are idle for extended periods.

GreaseMax® lubricator’s controlled, slow-rate continuous lubrication will assist with these maintenance problems.



  1. TURCK has expanded its HF portfolio with three new IO-Link read/write devices, offering improved performance with password protection and condition monitoring. 
    TURCK’s new RFID read/write devices with IO-Link come in three designs: M18 and M30 threaded barrel options; and a Q40 rectangular design...
  2. The importance of greasing bearings when they are moving is often not understood or is overlooked. There is a possibility that the importance is understood but is not done due to practical constraints such as moving machinery and OH&S regulations.
    Grease introduced into a stationary bearing...
  3. The hygiene and durability benefits of ultra-high molecular weight  polyethylene  (PE-UHMW) have been further extended by a new high temperature-resistant engineering plastic from Cut to Size Plastics.
    St 7000® EHT is formulated with a special additive that enables if to withstand elevated...