none

VORTEX WET SCRUBBERS COMBINE HIGH PERFORMANCE WITH LOW MAINTENANCE

26-10-2015
by 
in 

A new line of Handte Vortex wet scrubbers from Camfil Air Pollution Control (APC) delivers the combined benefits of high-performance wet dust collection with easy "plug and play" operation and low maintenance. 

The units are ideal for capture of very sticky dusts and fibers, for processes with high fire loads and flying sparks, and for filtration of highly explosive dusts (e.g.aluminum, magnesium, titanium, etc.) - particularly for applications where NFPA standards state that dry dust collection systems are not appropriate.

Because they provide wetting of combustible dusts, Handte Vortex scrubbers can eliminate the need for costly ancillary explosion protection devices. There are no filters to replace, reducing overall maintenance requirements, and the units install quickly and are easy to operate. 

Handte Vortex scrubbers use combined principles of water swirl and disintegration to provide two levels of separation of dust particles traveling through the system. The scrubbers work best with medium to large grain emissions and provide 99 percent removal efficiency on particles of 3.0 micron and larger. Moist clean air is exhausted out through a central air outlet.

The water level is automatically controlled, feeding in fresh water as needed to ensure that the concentration of dust particles in the scrubbing fluid is kept below required thresholds for optimum safety and performance.

Two basic models are available to meet different application needs. The Handte Vortex Dual has an integrated fan/ventilator within the unit which intensifies the separation of dust particles. It combines a robust but low-profile design with maximum versatility to handle a wide variety of applications. The Handte Vortex (standard) has a top-mount fan and uses separation principles that are especially effective in dealing with fibers and fluff, including sticky materials.

Handte Vortex scrubbers operate at low internal pressure drop compared to venturi-type wet collectors.  Two horsepower ratings are available for standard and high static pressure applications.

 

Camfil APC

www.camfilapc.com

1-870-933-8048

Related news & editorials

  1. 22.09.2021
    22.09.2021
    by      In
    Leussink, the exclusive Australian distributor of Demmeler 3D Welding table solutions, has expanded its range with the new Demmeler WeldSpace system, a fully equipped welding cell with a built-in welding cobot.
    Leussink’s Managing Director Jason Leussink says the new Demmeler WeldSpace system is... Read More
  2. 22.09.2021
    22.09.2021
    by      In
    In a $600,000 research partnership between AML3D Limited and Deakin University, supported through the Innovative Manufacturing Cooperative Research Centre (IMCRC), experts are developing high strength aluminium – scandium welding wire for Wire Additive Manufacturing (WAM®) applications.
    AML3D, a... Read More
  3. 22.09.2021
    22.09.2021
    by      In
    New Elesa stainless steel hinges in AISI 304 grade join the company’s existing ranges in both 304 and 316 grades, offering high strength for heavy doors as well as excellent corrosion resistance.
    These are especially suited to enclosure installations in arduous environments, such as pharmaceutical... Read More
  4. 20.09.2021
    20.09.2021
    by      In
    Lateral restraint blocks made of an engineering plastic that typically retains most of its strength over 100 years are being produced by Hercules Engineering to safeguard suburban and highway concrete bridges against earthquakes and radical structural movement.
    The custom-fabricated high density... Read More
Products
Suppliers