none

TURCK UNVEILS NEW UPROX3 SERIES OF SENSORS

26-05-2015
by 
in 

TURCK has introduced the uprox3 series of sensors, offering the largest switching distances of all Factor 1 sensors on the market thanks to an electronic platform that uses the latest chip set and manufacturing technologies.

These technologies are a world first, enabling the creation of the uprox3 Factor 1 sensors in compact, 4mm smooth barrel and M5 designs with a 1mm switching distance, even for flush mounting.

TURCK has also managed to shrink the previously most compact M8, M12 and M18 designs.

uprox3 sensors are the third generation of TURCK’s uprox Factor 1 sensors.

Although the existing uprox+ sensors offered large switching distances for all metals, these distances are increased by as much as 50 percent in the new sensors.

It previously was unattainable to sense 3mm in the M8 design, 6mm in M12 and 10mm in M18.

However, thanks to the consistent development of its uprox technology, TURCK has been able to achieve these larger switching distances without any compromises in performance.

The uprox3 sensors still offer outstanding application reliability for demanding sensing tasks, but also allow for the possibility of completely new installations.

Because of their inherent immunity to magnetic fields, the uprox3 series sensors are suitable for use in many demanding industrial sectors, such as welding for the automotive and metal forming markets.

The new uprox3 series will be available with robust PTFE coated sensors in M8, M12 and M18 designs. weldguard will also be available.

Like their predecessors, all uprox3 sensors offer a high EMC stability and flexible mounting including full flush mounting, as well as precise switch points.

 

TURCK AUSTRALIA

Ph: 1300 132 566

www.turck.com.au

Related news & editorials

  1. 22.07.2021
    22.07.2021
    by      In
    Control Logic is now offering the PULS PISA-B Electronic protection module. The new generation module is highly compact, with eight separated and individually adjustable channels. It delivers protection you can bank on for load circuits with different demands in 24V systems.
    A range of control... Read More
  2. 22.07.2021
    22.07.2021
    by      In
    A crane operating on poorly aligned rails is prone to premature wear, reduced performance and safety risks.
    Left unattended to, runway alignment issues can reduce the service life of a crane, meaning these ultra-reliable lifting devices aren’t delivering their maximum value.
    To ensure cranes are... Read More
  3. 22.07.2021
    22.07.2021
    by      In
    Slicing through metal bar can present safety risks, including the potential for injury from the blades or sparks, not to mention the trip hazard of the power cord to the tool itself.
    To heighten the safety of rebar and metal bar cutting, common to so many building, construction, infrastructure and... Read More
  4. 20.07.2021
    20.07.2021
    by      In
    A new lightweight, low-profile Enerpac HMT 13000 interchangeable torque wrench is being introduced to the Asia-Pacific and Australasia, offering faster operation, fewer moving parts and with rugged alloys that give it 2.5 times the typical lifespan of comparable tools.
    The HMT 13000 – which is an... Read More
Products
Suppliers