none

TURCK unveils new ‘failsafe’ power supply units

31-08-2010
by 
in 

 

TURCK now offers a series of switched mode power supply units with IP67 protection for customers requiring a 24V power supply directly in the field.
 
A large amount of expensive cabling with large cross sections is required if the field device and the control cabinet for the plant are large distances apart. 
 
The use of power supply units with IP67 protection is particularly suitable here, since they provide a 24V power supply directly in the field without any voltage drop. 
 
Due to their degree of protection to IP67, the new PSU67 power supply units can also be fitted directly to the machine without any protective measures.
 
The power supply units offer a high level of failsafe performance, thanks to their no-load and short-circuit protection as well as passive air cooling. The devices also automatically bridge voltage dips of up to 50ms. 
 
The high efficiency of the devices ensures a good energy balance of up to 90 percent. The AC/DC wide range input and an ambient temperature range from -25 to +60°C make the power supply units suitable for worldwide use. 
 
They feature a voltage output with a 4-pin 7/8 inch connector. LEDs indicate the actual operating state to the user.
 
TURCK is offering the PSU67 series switched-mode power supply units in four variants: A 2A, 4A and an 8A variant, each with one output, and a variant with two 4A outputs. The power supply units are compliant with the requirements of EN 60950-1 and the cULus and CE approval.
 
TURCK Australia
Ph: 1300 132566

Related news & editorials

  1. 22.07.2021
    22.07.2021
    by      In
    Control Logic is now offering the PULS PISA-B Electronic protection module. The new generation module is highly compact, with eight separated and individually adjustable channels. It delivers protection you can bank on for load circuits with different demands in 24V systems.
    A range of control... Read More
  2. 22.07.2021
    22.07.2021
    by      In
    A crane operating on poorly aligned rails is prone to premature wear, reduced performance and safety risks.
    Left unattended to, runway alignment issues can reduce the service life of a crane, meaning these ultra-reliable lifting devices aren’t delivering their maximum value.
    To ensure cranes are... Read More
  3. 22.07.2021
    22.07.2021
    by      In
    Slicing through metal bar can present safety risks, including the potential for injury from the blades or sparks, not to mention the trip hazard of the power cord to the tool itself.
    To heighten the safety of rebar and metal bar cutting, common to so many building, construction, infrastructure and... Read More
  4. 20.07.2021
    20.07.2021
    by      In
    A new lightweight, low-profile Enerpac HMT 13000 interchangeable torque wrench is being introduced to the Asia-Pacific and Australasia, offering faster operation, fewer moving parts and with rugged alloys that give it 2.5 times the typical lifespan of comparable tools.
    The HMT 13000 – which is an... Read More
Products
Suppliers