none

TOUGH PUMPS MASTER ABATTOIR WASTEWATER PROCESSING

20-03-2019
by 
in 
Gorman-Rupp pumps can be maintained without wet well lids being opened, and without cranes

Darling Irrigation supplies solutions for irrigation, domestic water systems, mining hydraulics, stock watering and more. With a staff of around 50 and four locations in western NSW [and one in Launceston], Darling Irrigation assists a wide range of customers with quality water systems.

The company recently undertook a contract for the design and construction of water and wastewater infrastructure for the new North Bourke Abattoir.

Wanting to deliver a quality project, with pumps that were reliable, easy to maintain and safe for operators, Darling Irrigation approached Hydro Innovations for solutions using Gorman-Rupp self-priming pumps.

There were five applications for a total of nine pumps from “kill floor” hose down to pond storage transfer and effluent pumping. As some of these applications contained abrasive media in the pumped water, Hydro Innovations proposed pumps with Gorman-Rupp “hard iron” internals to reduce wear rates and considerably lengthen the intervals between servicing.

Darling Irrigation chose the Gorman Rupp pumps for their strong international reputation, reliability and longevity in tough pumping conditions. And because they are self-priming pumps, they could be mounted at ground level so that operators have easy and safe access to the pumps for monitoring and maintenance, without the need for cranes.

Phil Chegwidden, Project Manager on the job for Darling Irrigation, has been impressed by how easy the pumps were to install, how quickly the pumps self-prime, and how smoothly they operate.

He says he can now understand why so many abattoirs have standardised on Gorman-Rupp pumps for their wastewater systems.

Hydro Innovations
02 9898 1800
www.hydroinnovations.com.au

Related news & editorials

  1. 07.09.2021
    07.09.2021
    by      In
    The ability to perform under pressure is one of the many reasons that original equipment manufacturers choose Boker’s, Inc. to supply their washers, spacers, shims and stamped component parts. That, along with the highest quality standards, tolerances and finishing requirements, make the decision a... Read More
  2. Lampo
    02.07.2021
    02.07.2021
    by      In , In , In
    A new class of emergency response equipment has just been introduced by Hydro Innovations. Called the Lampo, from Euromacchine, the units are trailer-mounted multi-purpose machines designed to simplify the deployment of equipment for municipalities, emergency services and contractors.
    The aim of... Read More
  3. Gorman-Rupp and Hydro Innovations worked together to distribute the pumps to fire stations across Australia.
    01.03.2021
    01.03.2021
    by      In , In
    In the summer months of 2019/2020, Australia experienced one of the worst bushfire seasons on record.
    Over 46 million acres of land was burnt across all Australian states and territories. Australia experienced devastating loss with thousands of homes destroyed and an entire species of animals and... Read More
  4. The EDUR LBU 404 C120L with 5.5kW motor multi-phase pump produces consistent fine micro bubbles perfect for the operation of a DAF tank.
    09.02.2021
    09.02.2021
    by      In , In
    Traditional Dissolved Air Flotation pumping systems have so many moving parts. The components include an air compressor, pressure vessel, centrifugal pump and of course the controller to get all three components to work harmoniously.
    The disadvantages of such a complicated system are many. For one... Read More
Products
Suppliers