Tank cleaning has never been easier

02-08-2011

Some companies still hesitate to automate their tank cleaning despite compelling benefits – water saving, reduced chemical and labour costs and improved workplace safety.

Spraying Systems Co, experts in spray technology, can optimise tank cleaning operations and remove contact with hazardous chemicals.

For more than 70 years, their engineers have been assisting food, beverage, pharmaceutical, chemical and paper companies to get a more thorough and faster clean for tanks.

Technology advancements have made it easier to remove stubborn residues, reduce cleaning cycle times and achieve higher levels of automation.

If you’re experiencing a difficulty with your current procedure, Spraying Systems’ engineers have the technical knowledge and training to assist.

The first step is to audit your operation, to determine the number and specific diameter, height and length characteristics of tanks to be cleaned.

Are there obstructions like agitators or mixers? Do certain areas like skim lines need more cleaning? Are the residues sticky or easily rinsed away? Are cleaning agents required or is water sufficient? Does the agent need to be heated?

With answers to questions such as these, companies can seamlessly move from manual cleaning of tanks to an automated system – and receive all the added benefits.

Spraying Systems Co Pty Ltd
Ph: 03 9318 0511
www.spray.com.au

RELATED NEWS

  1. Made a program change you wish you hadn't? Lose the only copy of the device program? Not sure if the program running is the right one?
    Control Logic’s ‘Vault’, powered by MDT AutoSave Change Management software, is a plug-and-play system to help reduce errors and downtime, increase productivity,...
  2. tank
    A collaborative partnership between Lockheed Martin, Australian manufacturer Omni Tanker and the University of New South Wales (UNSW) will look to develop and commercialise world-first composite tank technologies, thanks to a grant from the Federal Government’s Advanced Manufacturing Growth Centre...
  3. 3D printer
    Obsolescence is an unavoidable part of any manufacturing environment. However, it’s concerning that nearly 70% of companies admit they do not know when vital equipment requires replacing, or when they do, they scramble to find replacements. Here, Claudia Jarrett, country manager at automation parts...