none

STAINLESS-STEEL TANK COVERS HAVE HYGIENIC PROCESSES COVERED

04-12-2019
by 
in 

Alfa Laval tank covers provide easy and convenient visual inspection or entry to tank interiors, and meet virtually every requirement in the dairy, food, beverage, pharma and home-personal industries.

For hygienic process, Alfa Laval offers a complete range of 3A approved inspection and personnel entry ports available with a variety of surface finishes and seal materials.

The tank covers securely fit the openings of high-, low- or zero-pressure tanks, both above and below the liquid level.

There are two models for use with hygienic processes: the LKD and the LKDC.

The oval-shaped Alfa Laval LKD stainless-steel tank cover is used on tanks or containers in various hygienic industries. For inspection purposes the cover can then be turned into the tank. For personnel entry, the cover can either be removed at the double hinge or swung out of the tank. The seal is hygienically positioned and is not affected by positive or negative pressure in the tank.

The circular Alfa Laval LKDC stainless-steel tank cover is used on top of tanks or containers. It is supplied with a unique replaceable, self-sealing double lip seal to prevent fluids from spraying out, for example, during CIP cleaning and similar processes.

Alfa Laval tank covers are available in AISI 304 or AISI 316L stainless steel with EPDM, NBR, FPM or Q (silicone) seal materials. Surface finishes include electro-polished, brushed and acid pickled, and vary from Ra 0.8 to Ra 0.4 to meet the requirements of hygienic processes.

Alfa Laval
1800 023 182
www.alfalaval.com

Related news & editorials

  1. 22.09.2021
    22.09.2021
    by      In
    Leussink, the exclusive Australian distributor of Demmeler 3D Welding table solutions, has expanded its range with the new Demmeler WeldSpace system, a fully equipped welding cell with a built-in welding cobot.
    Leussink’s Managing Director Jason Leussink says the new Demmeler WeldSpace system is... Read More
  2. 22.09.2021
    22.09.2021
    by      In
    In a $600,000 research partnership between AML3D Limited and Deakin University, supported through the Innovative Manufacturing Cooperative Research Centre (IMCRC), experts are developing high strength aluminium – scandium welding wire for Wire Additive Manufacturing (WAM®) applications.
    AML3D, a... Read More
  3. 22.09.2021
    22.09.2021
    by      In
    New Elesa stainless steel hinges in AISI 304 grade join the company’s existing ranges in both 304 and 316 grades, offering high strength for heavy doors as well as excellent corrosion resistance.
    These are especially suited to enclosure installations in arduous environments, such as pharmaceutical... Read More
  4. 20.09.2021
    20.09.2021
    by      In
    Lateral restraint blocks made of an engineering plastic that typically retains most of its strength over 100 years are being produced by Hercules Engineering to safeguard suburban and highway concrete bridges against earthquakes and radical structural movement.
    The custom-fabricated high density... Read More
Products
Suppliers