none

Sneak peak at new super air nozzles

25-05-2010
by 
in 

Exair's new Peek Super Air Nozzles deliver strong blowing force while providing non-marring protection should the air nozzle come in contact with other surfaces. 

The engineered thermoplastic construction offers excellent resistance to chemicals, fatigue, and temperatures up to 160°C. 

Applications include part drying, machinery and parts cleaning, chip removal, part ejection, liquid blowoff, and cooling hot parts.

The Peek Super Air Nozzles provide high air amplification and strong blowing force. 

At 80 PSIG, the sound level is under 76dBA which meets OSHA noise requirement 29 CFR 1910.95(a). 

Safe operation is assured since the airflow cannot be blocked as required by OSHA standard 29 CFR 1910.242(b). 

Installation of these engineered air nozzles qualify for energy provider rebates (USA).

The Model 1110-PEEK Nano Super Air Nozzle with an M6 x 0.75 inlet measures only 20mm in length, has a diameter of 6mm, an air consumption of 8.3 SCFM, and produces 230 grams of blowing force. 

The Model 1102-PEEK Super Air Nozzle has a ¨û” inlet, measures 30mm in length, has an air consumption of 10 SCFM, and produces 255 grams of blowing force. 

The Model 1100-PEEK Super Air Nozzle has a ¼” inlet, measures 44mm in length, has an air consumption of 14 SCFM, and produces 368 grams of blowing force.

Compressed Air Australia Pty Ltd
Ph: 1300 787 688
http://caa.exair.com

Related news & editorials

  1. 16.03.2018
    16.03.2018
    by      In
    In the 1960s, as much as a quarter of Australia’s workforce was employed in the manufacturing sector, and the industry fuelled 25% of the nation’s economy, according to the Productivity Commission. Half a century on, the closure of Toyota, Ford and then General Motors in October 2017 seemed to... Read More
  2. 24.01.2018
    24.01.2018
    by      In
    According to Southern Cross CEO, Mark Ferguson, if Australian industry really wants to get serious about saving energy then it needs to take a close look at ‘two-stage’, air compressor technology. As energy costs continue to outstrip other business input expenses it is critical, more than ever... Read More
  3. Martin Chappell
    03.11.2017
    03.11.2017
    by      In
    With Australia’s manufacturing industry strengthening, leaders and heads of IT are weighing up which new technologies they should implement to gain a competitive edge. Martin Chappell from Motorola Solutions explains how a simpler and more focused use of data can be the best approach.
    Australia’s... Read More
  4. Sahara Force India F1
    29.08.2017
    29.08.2017
    by      In
    The pace of Formula One (F1) development is rivalled only by the speeds achieved on the racetrack. Each time the Sahara Force India F1 Team brings its car to a circuit, it represents the team’s top engineering; every time the team leaves, the car is just a baseline. Between races it must be... Read More