Sizzling performance from high temp gear pumps


Gorman-Rupp has a gear pump range capable of handling process liquids with temperatures to 357oC.

This enables the range to handle the extreme temperatures necessary for heat transfer liquids, commercial food preparation, and processing industrial waste containing oils and solvents with very high temperatures. 

According to Hydro Innovations, Australian distributor of Gorman-Rupp pumps, these high temperature pumps are available in 15 sizes with flows ranging from just a few litres per minute up to 1150L per minute. They are also capable of pressures to 14 Bar.

Hydro Innovations spokesperson Garry Grant says there are numerous features built into the pumps enabling them to operate constantly at high temperatures.

Firstly, a unique seal cavity design features an oversized bore and “vent to suction” system for maximum circulation and cooling. This seal cavity design also allows for numerous seal types and designs (so that specific fluids can be catered for).

The standard seal jacket and economical quench gland also provides effective mechanical seal cooling which allows the pump to handle extreme temperatures.

The simple accessible seal gland permits easy disassembly without shaft removal.

The high temperature models are part of Gorman-Rupp’s Heavy-Duty range, which all feature adjustable “no-leak” pressure relief valves, back pull-out design, automatic idler pin lubrication systems and deep end-feed areas to handle highly viscous materials.

Hydro Innovations
Ph: 02 9647 2700


  1. Made a program change you wish you hadn't? Lose the only copy of the device program? Not sure if the program running is the right one?
    Control Logic’s ‘Vault’, powered by MDT AutoSave Change Management software, is a plug-and-play system to help reduce errors and downtime, increase productivity,...
  2. tank
    A collaborative partnership between Lockheed Martin, Australian manufacturer Omni Tanker and the University of New South Wales (UNSW) will look to develop and commercialise world-first composite tank technologies, thanks to a grant from the Federal Government’s Advanced Manufacturing Growth Centre...
  3. 3D printer
    Obsolescence is an unavoidable part of any manufacturing environment. However, it’s concerning that nearly 70% of companies admit they do not know when vital equipment requires replacing, or when they do, they scramble to find replacements. Here, Claudia Jarrett, country manager at automation parts...