Clear sky
-4 °C
Germantown, Maryland
Clear sky

Tue Dec 11 2018
none

SELF-PRIMING PUMP HANDLES CORROSIVE WASTEWATER

31-03-2017
by 
in 

The T3A65S-B is a self-priming solids-handling trash pump from Gorman-Rupp. This tough and reliable pump is made from duplex stainless steel, which is harder and more corrosion resistant that 316 grade stainless steel.

Ideal for harsh environments such as industrial wastewater, where abrasive particles are commonplace, the T3A65S-B can also be used as a grit pump at sewage treatment plants.

The pump’s suction head characteristics and repriming capability make it the ideal choice for continuous unattended automatic operation.

The T3A65S-B can also be used as a solids handling pump. The pump can handle spherical solids up to 63mm in diameter, and because of its self-cleaning wear-plate system, it is able to handle stringy materials such as rags, gloves and plastic bags.

These pumps can be mounted “high and dry”, making them easy for operators to access. Alongside the cost efficiency, the pumps can be mounted on backs or beside reservoirs without the need to provide lifting apparatus or construct special suction wells, or having them submerged in water.

Self-priming pumps provide a safer, and simpler alternative for operators making maintenance costs lower over the life of the pump installation.

The T3A65S-B has 80mm suction and discharge ports and is capable of flows to 25L/s and heads to 32m, but others in the series can produce flows to 200L/s. The pump can operate on suction lifts to 7.6m, and are available in other materials of construction, such as hardened iron for abrasive applications.

Hydro Innovations
02 9898 1800
www.hydroinnovations.com.au

Related news & editorials

  1. 11.12.2018
    11.12.2018
    by      In
    Wenglor has expanded its PNG smart generation of photoelectronic sensors, available in Australia from Treotham Automation. The range now comprises seven devices, including new compact 1P (50 x 50 x 20mm) and 1N (75 x 32.5 x 18mm) housings, all equipped with IO-Link 1.1 for Industry 4.0 integration... Read More
  2. 11.12.2018
    11.12.2018
    by      In
    Responding to increasing demand for rapid prototyping and small-batch wear-resistant plastic parts, igus has increased the capacity of its 3D printing service with the addition of new laser sintering printers.
    Available in Australia via Treotham Automation, the igus 3D printing service uses a... Read More
  3. 11.12.2018
    11.12.2018
    by      In
    Machine builders and systems integrators using rotary encoders for speed and position feedback are faced with a bewildering array of encoder specifications that can make choosing and stocking the correct encoder for each job a logistical nightmare.
    The solution is the Posital’s new magnetic series... Read More
  4. 07.12.2018
    07.12.2018
    by      In
    Control Logic has a range of LED-based tubular light fittings that promise considerable energy savings in hazardous environments. The R. Stahl 6036 series are suitable for use in Ex zones 1/21 and 2/22 where they provide a low-energy alternative to typical linear luminaires.
    At just 55mm diameter,... Read More