none

ROBUST MASS FLOW METERS AND CONTROLLERS FOR GASES

05-02-2019
by 
in 

Mass-Stream instruments operate on the basis of direct through-flow measurement in accordance with the constant temperature anemometer principle. They contain no moving parts and the measured gases pass the two stainless steel sensor probes directly, without bypass. As a result, the gases are entirely unhindered on their flow path, making the series particularly suitable for applications with low pressure loss as well as less sensitive to moisture and particulate contamination than thermal mass flow instruments with a bypass sensor.

The electronics casing has a robust design with an IP65 level of protection (dustproof and splash waterproof). The mass flow meters and controllers can be supplied with an optional integrated multifunctional display. On the new D-6390 model, the maximum measuring range has been expanded to 10,000L/min air equivalent under normal conditions. Analogue I/O signals as well as an RS232 interface are provided as standard. In addition, an interface with DeviceNet, Profibus DP, Modbus or Flow-Bus protocols can be integrated. Typical applications include gas consumption measurements, aeration and purging processes or natural gas/biogas applications.

AMS Instrumentation & Calibration
03 9017 8225
www.ams-ic.com.au

Related news & editorials

  1. 16.08.2019
    16.08.2019
    by      In
    Global technology and engineering company Emerson has expanded its AMS Device Manager with HART-IP support, making it easier to connect with devices and control systems and potentially eliminating hundreds of thousands of dollars in project hardware and engineering. AMS Device Manager is used by... Read More
  2. 16.08.2019
    16.08.2019
    by      In
    Hirschmann’s revamped BAT-C2 industrial wireless client, available in Australia from Control Logic, improves on its earlier BAT-C with a range of new hardware and software features including 802.11ac support. It is a perfect replacement for physical cabling in areas where installation of cables is... Read More
  3. 16.08.2019
    16.08.2019
    by      In
    The FPI Mag meter from McCrometer is ideal for capital or maintenance projects, retrofits and sites never metered before. Its unique combination of accuracy, ease of installation and total cost savings make it the perfect choice for a wide range of municipal and industrial applications.
    This meter... Read More
  4. 15.08.2019
    15.08.2019
    by      In
    Insufficient grip resulting in slipping parts, pushback in chuck jaws and collets wearing out prematurely are issues well known to CNC turning machine tool operators. The resultant downtime and expense of new or reworked jaws are significant problems.
    Well-known workholding solutions provider Dimac... Read More