none
none

RELIABLE, ROBUST GLOBE VALVE FROM GEMÜ

19-01-2015
by 
in 

The universally compatible GEMÜ 536 globe valve has a robust design and is reliable in operation. This valve was developed with a long service life and low maintenance requirements in mind.

The GEMÜ 536 pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator, which can be controlled by inert gaseous media.

The valve plug is fixed to the spindle in such a way as to allow flexing during closure in order to ensure tight shut off.

Steel and PTFE as well as a fibre glass-reinforced PTFE version are available as seats.

The valve spindle is sealed by a self-adjusting gland packing. This provides a low-maintenance and reliable valve spindle seal even after an extended period of operation.

The wiper ring, which has also been introduced additionally protects the gland packing from contamination and damage.

The customer has a choice between cast stainless steel 1.4408 or SG iron GGG40.3 (available from the beginning of 2015) for the material of the valve body. A flange in accordance with EN 1092 or ANSI cl. 125/150 RF is available for the piping connection.

A good flow rate and controllability is achieved due to the globe valve design. Standard regulating cages are used in the control valve design.

Thanks to the high-quality design, GEMÜ 536 is also suitable for high operating temperatures and pressures. A version according to ATEX is also available as an option.

 

GEMÜ Group

www.gemu-group.com

Related news & editorials

  1. 23.02.2018
    23.02.2018
    by      In
    The optoNCDT 1750 laser triangulation sensor is now available from Bestech Australia with extended measurement ranges of 500 and 750mm. This is a major addition to the existing 2-200mm measurement range, offering superior performance to its predecessor, the ILD1700.
    The 1750 laser triangulation... Read More
  2. Silent DieselDIESEL-POWERED PRESSURE CLEANER IS A QUIET ACHIEVER  The latest model of high-pressure water cleaner from Spitwater uses a “silent” diesel engine to provide industrial-grade cleaning performance in applications where noise might be a problem.  Designed and built at Spitwater’s Albury manufacturing plant, the Model SW15200DES Silent Diesel delivers 15L/min hot or cold water flow at 200bar pressure in a self-contained, portable machine.   Like all Spitwater machines, the new unit is based on a th
    21.02.2018
    21.02.2018
    by      In
    The latest model of high-pressure water cleaner from Spitwater uses a “silent” diesel engine to provide industrial-grade cleaning performance in applications where noise might be a problem.
    Designed and built at Spitwater’s Albury manufacturing plant, the Model SW15200DES Silent Diesel delivers 15L... Read More
  3. 20.02.2018
    20.02.2018
    by      In
    Turck has developed a novel protocol that enables high-density networking with I/O resource constrained PLCs. The Backplane Ethernet Extension Protocol (BEEP) can be used to network up to 33 devices and link them to a PLC on a single connection using a single IP address.
    The first device in the I/O... Read More
  4. 20.02.2018
    20.02.2018
    by      In
    MTI See-Thru Insulated Traffic Doors provide a rugged low-maintenance solution to maintaining climate control between different internal temperature zones.
    The strongly built 44mm-thick traffic doors are made with a rigid PVC framework, a high-impact ABS plastic skin, internal foam insulation and a... Read More