none

RED LION WATCHDOG HEARTBEAT RELAY

18-10-2016
by 
in 

Control Logic has introduced Red Lion’s Watchdog Relay. It is the industry’s only rugged hardware-based solution that reliably monitors and provides fail-safe shutdown of processes controlled by RTUs, PLCs and other automation devices. This industrial automation solution helps to proactively protect unmanned processes on a 24/7 basis.

Watchdog Relay monitors the pulsing output heartbeat of a connected device to add an extra level of safety that helps protect critical processes across industrial environments that include oil, gas, maritime, power and energy. If the heartbeat stops for reasons that may include power surges, extreme weather or device malfunctions, Watchdog’s built-in Form C relay will immediately energise and provide a signal that can be used to safely shut down the process. The signal sent upon loss of control helps to avoid costly damage to materials and equipment.

Built to operate in extreme conditions, Watchdog Relay supports temperatures ranging from -40 degrees to 80 degrees Celsius, as well as 5 to 85 percent humidity. It is UL Class I, Div II listed and ATEX hazardous locations certified, and has been marine and offshore tested and/or verified to meet standards such as ABS, DNV No. 2.4 and Lloyds.

Control Logic

1800 557 705

http://www.​control-logic.com.au

 

Related news & editorials

  1. 20.08.2018
    20.08.2018
    by      In
    New from Control Logic, the Hirschmann Spider III family of industrial unmanaged Ethernet switches allow users to reliably transmit large amounts of data across any distance with ease thanks to plug-and-play capabilities for quick installation and start-up without the use of tools.
    These compact... Read More
  2. 20.08.2018
    20.08.2018
    by      In
    Available now from Treotham Automation, the latest igus Chainflex cable is designed for CANbus systems in highly dynamic energy chain applications, such as machine tools.
    Controller Area Network (CAN) systems are increasingly popular for networking of electronic systems such as control units and... Read More
  3. 20.08.2018
    20.08.2018
    by      In
    FARO has developed the world’s first arm-based scanning solution to include high-resolution 3D colour scanning capabilities.
    The Design ScanArm 2.5C is compatible with the FARO 8-axis FaroArm system, which effectively doubles the arm reach. This enables it to address design challenges across a... Read More
  4. 20.08.2018
    20.08.2018
    by      In
    Mastercut manufactures custom shim packs that enable the precise alignment of machinery and plant. Any profile can be precision cut in-house using specialised lasers or by acid etching, and the company specialises in fast turnaround for delivery to mining, oil, gas and power plants throughout... Read More