Cloudy
1 °C
Germantown, Maryland
Cloudy

Tue Feb 19 2019
none

PROTECT ELECTRONICS FROM HEAT WITH DIGITAL CONTROL

18-04-2015
by 
in 

EXAIR's digital ETC (Electronic Temperature Control) is now available for Dual Cabinet Cooler Systems installed on large or high heat load enclosures.

An ETC Dual Cabinet Cooler system will keep electrical enclosures cool while minimizing compressed air use.

Systems produce -7°C (20°F) air to eliminate high temperature malfunctions and protect sensitive electronics from harsh environments.

They are available in cooling capacities up to 5,600 Btu/Hr.

Available from Compressed Air Australia, the ETC accurately maintains a constant temperature in the electrical enclosure that is slightly under the maximum rating of the electronics.

It permits just enough cooling for the electronics without going so cold as to waste compressed air.

A digital LED readout displays the temperature of the electrical enclosure (°C or °F), then displays the user temperature setting when pressing the “push to set” button.

When that setting is exceeded, the Cabinet Cooler System is activated.

The ETC is suitable for NEMA 4, 4X and 12 environments and works with our UL listed Dual Cabinet Cooler Systems which are available with cooling capacities of 4,000, 4,800 and 5,600 Btu/Hr.

Cabinet Cooler Systems include an automatic drain filter separator to keep moisture in the compressed air out of the enclosure.

The ETC is offered for 120 VAC or 240 VAC and lower cooling capacity Cabinet Cooler Systems are available. 

These products are CE compliant.

 

Compressed Air Australia Pty Ltd

Ph: 1300 787 688

www.caasafety.com.au

Related news & editorials

  1. 20.02.2019
    20.02.2019
    by      In
    Security of access to industrial, logistics and data facilities is a growing issue in Australasia as we move to 24/7 trading cycles and criminals target activity hotspots for theft, commercial data penetration and trafficking of illegal goods and substances.
    Entry expert Boon Edam says the full... Read More
  2. 19.02.2019
    19.02.2019
    by      In
    A new release of Emerson’s AMS Device Manager helps improve plant reliability, with better organised data for more informed and proactive management of devices. New embedded tools allow operations and project teams to customise plant device hierarchies, project tracking, and device alerts,... Read More
  3. 19.02.2019
    19.02.2019
    by      In
    Rotoclear has been a leader in spin windows for many years, continually developing its models to provide maximum cleaning effectiveness and simple installation.
    Its latest model, the S3, features the world’s lowest installation height of just 34mm, allowing simpler installation than previous models... Read More
  4. 19.02.2019
    19.02.2019
    by      In
    Seco Tools’ new power milling chucks offer maximised milling performance, with levels of holding power and transmittable torque rivalling those of hydraulic and shrinkfit holders. They deliver enhanced application flexibility and cost effectiveness, allowing workshops to reduce their tooling... Read More