none
none

PEEK Atto Super Air Nozzle Features Precise Non-Marring Blowoff

31-08-2010
by 
in 
PEEK Atto Super Air Nozzle Features Precise Non-Marring Blowoff

EXAIR’s new PEEK Atto Super Air Nozzle™ has been engineered to produce the highest performance attainable from a tiny nozzle. It delivers the smallest, most precise blowoff with an efficient, high volume, high velocity airflow.

The overall length of the air nozzle measures only 12.7mm (0.50 inches) with a diameter of only 4mm (0.16 inches), permitting installation in tight spaces. Its PEEK plastic construction provides non-marring protection to production items as well as resistance to damage from harsh chemicals.

The PEEK Atto Super Air Nozzle is suitable for blowoff, cooling and drying applications located in general industrial or corrosive environments.

The Model 1108-PEEK Atto Super Air Nozzle provides a narrowly focused air pattern.

High amplification of airflow and a strong blowing force of 56.7 grams (2.0 ounces) are achieved with minimal air consumption of 2.5 SCFM at 80 PSIG.

Safe operation is assured since the airflow of the Atto Super Air Nozzle cannot be blocked, which meets the OSHA standard for dead-end pressure 29 CFR 1910.242(b). Sound level is very low at 58 dBA and meets OSHA noise requirement 29 CFR 1910.95(a), as well as being CE compliant.

Available from Compressed Air Australia, the PEEK Atto Super Air Nozzle is designed to easily replace existing wasteful nozzles or open pipes.

The compressed air inlet is male M4 X 0.5. The Atto Super Air Nozzle is also available in Type 316 Stainless Steel and with NPT or BSP threading.  For further details, click here.

For more information contact Compressed Air Australia Pty Ltd.

Related news & editorials

  1. Silent DieselDIESEL-POWERED PRESSURE CLEANER IS A QUIET ACHIEVER  The latest model of high-pressure water cleaner from Spitwater uses a “silent” diesel engine to provide industrial-grade cleaning performance in applications where noise might be a problem.  Designed and built at Spitwater’s Albury manufacturing plant, the Model SW15200DES Silent Diesel delivers 15L/min hot or cold water flow at 200bar pressure in a self-contained, portable machine.   Like all Spitwater machines, the new unit is based on a th
    21.02.2018
    21.02.2018
    by      In
    The latest model of high-pressure water cleaner from Spitwater uses a “silent” diesel engine to provide industrial-grade cleaning performance in applications where noise might be a problem.
    Designed and built at Spitwater’s Albury manufacturing plant, the Model SW15200DES Silent Diesel delivers 15L... Read More
  2. 20.02.2018
    20.02.2018
    by      In
    Turck has developed a novel protocol that enables high-density networking with I/O resource constrained PLCs. The Backplane Ethernet Extension Protocol (BEEP) can be used to network up to 33 devices and link them to a PLC on a single connection using a single IP address.
    The first device in the I/O... Read More
  3. 20.02.2018
    20.02.2018
    by      In
    MTI See-Thru Insulated Traffic Doors provide a rugged low-maintenance solution to maintaining climate control between different internal temperature zones.
    The strongly built 44mm-thick traffic doors are made with a rigid PVC framework, a high-impact ABS plastic skin, internal foam insulation and a... Read More
  4. 20.02.2018
    20.02.2018
    by      In
    Ham and salami producer D’Orsogna is expanding its business on the east coast, opening a $41 million facility in Melbourne’s north.
    In what was one of the biggest industrial deals in Melbourne in 2017, D’Orsogna has signed up to build a 10,858-square-metre manufacturing plant on 3 hectares at... Read More