none
none

OPTIMILL DELIVERS RELIABLE MACHINING – EVEN AT HIGH SPEEDS

12-04-2016
by 
in 

With trochoidal milling, significant improvements in terms of tool costs, clamping, processing times and load on the machine components can be achieved in many applications compared to conventional milling.

For this milling technology, MAPAL has expanded its OptiMill product range by adding mills for the machining of titanium and high-alloy steels as well as for hard machining.

As a result, new fields of application have been developed, such as structural components.

A specially engineered extremely unequal positioning of the five cutting edges in combination with an innovative geometric layout of the cutting wedge reduces vibrations.

Counterbalancing conducted during the manufacturing process (balancing grade 2.5) lowers the risk of vibrations even further.

As a result, the milling cutters of the OptiMill family can be used without problems – even at high speeds.

And to avoid the jamming which results from the long chips produced through the sizable depth of cut, a chip breaker is integrated which divides the chips in half.

This ensures the problem-free removal of the chips from the working space of the machine.

All OptiMill milling cutters for trochoidal milling have a cutting edge length of 3xD.

MAPAL also provides comprehensive process know-how and can take over the programming upon the customer's request.

For more information contact: www.mapal.com

Related news & editorials

  1. 20.02.2018
    20.02.2018
    by      In
    Turck has developed a novel protocol that enables high-density networking with I/O resource constrained PLCs. The Backplane Ethernet Extension Protocol (BEEP) can be used to network up to 33 devices and link them to a PLC on a single connection using a single IP address.
    The first device in the I/O... Read More
  2. 20.02.2018
    20.02.2018
    by      In
    Ham and salami producer D’Orsogna is expanding its business on the east coast, opening a $41 million facility in Melbourne’s north.
    In what was one of the biggest industrial deals in Melbourne in 2017, D’Orsogna has signed up to build a 10,858-square-metre manufacturing plant on 3 hectares at... Read More
  3. 20.02.2018
    20.02.2018
    by      In
    Satellite communications company Myriota is set to open an Internet of Things laboratory to help meet the demand for its technology.
    The $2.72 million laboratory will be located in the CBD of Adelaide to allow the company to integrate its ultra-low-cost satellite IoT solution into a wide range of... Read More
  4. 20.02.2018
    20.02.2018
    by      In
    After almost a century, the UK’s most iconic tool brand has arrived in Australia. Hartech Tools has been appointed the exclusive Australian wholesale distributor to launch and build Draper Tools in the Australian marketplace.
    Draper Tools was started in 1919 when the founder, Bert Draper, sold... Read More