Partly cloudy
14 °C
Seattle, Washington
Partly cloudy

Fri Jul 19 2019
none

NEW WASTE WATER PUMPS ‘ERADICATE’ DOWNTIME

21-01-2016
by 
in 

Gorman-Rupp, the world leader in solids handling self priming centrifugal pumps, has released the most advanced system for handling solids laden wastewater, according to Australian distributors, Hydro Innovations. 

Called the Eradicator™ solids management system, the technology is ideal for the new challenges for solids handling pumps, including stringy solids that would normally choke pumps and cause stoppages.

The new system comes as an option on the Gorman-Rupp range of Super T series pumps, and is also available as a retrofit kit on existing Super T Series pumps already in the field.

The Eradicator™ system features an aggressive self-cleaning wear-plate incorporating a number of notches and grooves, as well as a patent pending lacerating tooth that helps break up stringy materials, scrape them off the impeller vanes and pass them through the pump - all without impacting performance or interrupting service. A special cover plate with the system includes a patented lightweight inspection cover that can easily be removed if necessary to inspect pump internals.

System benefits include improved operational efficiency, increased uptime, reduced maintenance costs, lower life cycle costs and easier access to the impeller. Operators will also find that the lighter cover-plate is easier and safer to work with.

Eradicator-equipped pumps do not require expensive chopper blades that need periodic replacement, but rely on passing large solids and stringy materials straight through the pump.

The system is available with carbon steel or hardened alloy steel wear plates.

Pumps can handle flows from 5 l/s through to 200 l/s and heads to 45m, and Gorman-Rupp Super T Series pumps are able to be mounted high and dry above the wastewater (up to 7.6m) so that operators gain easy access without the need for cranes or other lifting devices (unlike submersible pumps).

 

Hydro Innovations

Ph: 02 9898 1800

www.hydroinnovations.com.au

Related news & editorials

  1. 19.07.2019
    19.07.2019
    by      In
    Requirements from clients have resulted in the production of 1 x 1m Vesconite Hilube polymer wear plates measuring 25mm and, more recently, 40mm in thickness.
    Vesconite Bearings’ technical sales consultant Eddie Swanepoel has been instrumental in translating clients’ requirements into new extruded... Read More
  2. 19.07.2019
    19.07.2019
    by      In
    The way to a ready-to-connect e-chain is now even quicker and easier with the new online igus e-chain expert. With the aid of this free and accessible online tool, users can design their e-chain systems using a smart phone, tablet or computer. Whether an unsupported, gliding or hanging application... Read More
  3. 19.07.2019
    19.07.2019
    by      In
    Machine or equipment failure causes a lot of trouble for operators: packaging equipment comes to a standstill or a wind turbine no longer turns. igus has therefore developed the world’s first intelligent plain bearing, which detects wear in extremely stressful applications in advance and sends a... Read More
  4. 19.07.2019
    19.07.2019
    by      In
    Deep drilling rigs with top drive systems are used in the oil and gas industry. To guide cables in these systems, manufacturers and operators have so far been using so-called ‘service loops’. However, these often create problems: the cables have no guidance or defined bend radius, and can slip into... Read More