none

New Floorsafe line marking paint a bright move

07-09-2010
by 
in 

Floorsafe International has released their new premium quality line marking paint specifically designed to improve safety on roads, factory floors, parking areas, crossings and steps.

Made from Chlorinated rubber this premium semi-gloss product is a durable quick drying coating. It has excellent adhesion to concrete and bitumen and the over- coating of existing lines.

In the past, managers and building owners have experienced long periods of down time waiting for line marking paints to dry.

With Floorsafe line marking dry time is less then 10min and can be subjected to light traffic within 20min and heavy traffic in less then 30min. 

Floorsafe line marking paint is available in three colors – yellow, white and black. 

A one-coat application will provide a nominal 375 microns wet film thickness and can be carried out by roller or brush. 

Where an anti-slip or a reflective line is required Floorsafe International can provide these additional safety additives.

The product is available in 1L, 2L and 4L containers.

One litre will line mark about 50m of 50mm line for less then $1.60 per metre.

Floorsafe
Ph: 1300 717 769
www.floorsafe.com.au

Related news & editorials

  1. 18.07.2018
    18.07.2018
    by      In
    3D printing with metals is affecting the way manufacturing occurs, and Australian distributor Raymax Applications reckons this is amply demonstrated by the application of SLM Solutions machines in metal manufacturing processes.
    SLM Solutions Group recently released its fourth generation 280 system... Read More
  2. 16.03.2018
    16.03.2018
    by      In
    In the 1960s, as much as a quarter of Australia’s workforce was employed in the manufacturing sector, and the industry fuelled 25% of the nation’s economy, according to the Productivity Commission. Half a century on, the closure of Toyota, Ford and then General Motors in October 2017 seemed to... Read More
  3. 24.01.2018
    24.01.2018
    by      In
    According to Southern Cross CEO, Mark Ferguson, if Australian industry really wants to get serious about saving energy then it needs to take a close look at ‘two-stage’, air compressor technology. As energy costs continue to outstrip other business input expenses it is critical, more than ever... Read More
  4. Martin Chappell
    03.11.2017
    03.11.2017
    by      In
    With Australia’s manufacturing industry strengthening, leaders and heads of IT are weighing up which new technologies they should implement to gain a competitive edge. Martin Chappell from Motorola Solutions explains how a simpler and more focused use of data can be the best approach.
    Australia’s... Read More