none

New colour measurement sensor for difficult surfaces

19-06-2014
by 
in 

Bestech Australia has unveiled a new circular sensor – the colorCONTROL ACS7000 spectral colour measurement system – for challenging surfaces.

The ACS7000 performs high precision inline colour measurements on structured, highly reflective and shiny metallic surfaces.

The colour impression of painted or woven surfaces often depends on the viewing angle. This not only applies to the human eye but also to sensors.

The new ACS2 circular sensor illuminates the measurement surface in a 360° circular manner and provides exact measurement results independently of the working direction, even on difficult surfaces such as metallic paint.

The sensor has a measurement geometry of 45° circular/0°. The sensor resolution (measurable colour distance) is ∆E<0.08.

The sensor’s very high measurement frequency of 2,000 Hz enables it to be used in high volume production applications. The measurement spot diameter is 5mm; 9mm is also available as an option. The optimal measurement distance is 28mm.

The colorCONTROL ACS7000 spectral colour measurement system from Bestech provides three measurement modes: colour recognition of up to 15 colours stored; colour measurement with trend analysis; as well as spectral comparison, whereby the reflection spectrum of the test object is displayed and evaluated.

The colorCONTROL ACS7000 colour measurement system with the new circular sensor ACS2 offers colour measurement independent of the turning position of structured, highly reflective and shiny metallic surfaces.

Measurement applications are in quality assurance, textiles industry, plastics engineering, machine building and car manufacturing.

 

Bestech Australia Pty Ltd

Ph: 03 9540 5117

www.bestech.com.au

Related news & editorials

  1. 15.09.2021
    15.09.2021
    by      In
    The Australian Trellis Door Co are proud to announce their commercial roller shutters.
    Recently installed for Taco Bell in Orange, NSW, and project managed by the Sydney-based Aspect Design and Development, they have a vermin-proof facility which still permits ample ventilation.
    The model series 2... Read More
  2. 15.09.2021
    15.09.2021
    by      In
    CNC specialist NUM has launched a unique 2D drawing tool that simplifies the design and creation of executable G-code files for CNC cutting machines.Known as NUMcad, the new drawing software runs directly from the machine’s operator panel and also under Windows on any standard PC. Its user... Read More
  3. 13.09.2021
    13.09.2021
    by      In
    ICP Electronics Australia Presents iEi’s Mustang-V100-MX4 Computing Accelerator Card The Mustang-V100-MX4 is a deep learning convolutional neural network acceleration card for speeding up AI inference, in a flexible and scalable way.
    Equipped with Intel® Movidius™ Myriad™ X Vision Processing Unit (... Read More
  4. 13.09.2021
    13.09.2021
    by      In
    EMKA have noted the growth of social and industrial dependence on internet cable connectivity – and the way that the roll out of superfast broadband has led to a greater number of cabinets on our streets.
    At the same time, it seems that there has been an increase in the scope of “street culture”... Read More
Products
Suppliers