none

Make the switch to TURCK

31-08-2010
by 
in 
Make the switch to TURCK

 

Flexibility … TURCK’s new family of power supplies

 
TURCK has introduced a new family of power supplies to expand the company’s existing family of power supplies. 
 
Designed to efficiently convert AC to DC, these 24VDC Power Supplies provide safety extra-low voltage (SELV), according to EN 60950, and are suitable for the 24V supply of according equipment and interface modules of the TURCK series IM, IMS and IMC.
 
Offering wide-range input — between 90 and 260 VAC — the 24VDC Power Supply can be used in diverse supply networks worldwide. 
 
Through the use of an onboard potentiometer, the output voltage can be adjusted from 22.5 up to 28.5 VDC, and styles are available with an output current strength of 2.5, 5, 10 or 20 ampere.
 
Featuring Class 1, Division 2 certification and rated IP20, the TURCK 24VDC Power Supply was developed specifically to guarantee a dependable DC supply in the industrial environment. 
 
This highly-efficient power supply can be run in parallel for applications requiring redundancy and includes overload protection of up to 150 per cent.
 
For enhanced operator control and device status, a power relay guarantees a reliable functional check, monitoring itself for voltage. 
 
This eliminates potential wire breakage or system malfunction. The device can also bypass power failures automatically, which allows the AC input to disappear for up to 30ms without any effect on the output.
 
TURCK 
Ph: 1300 132566

Related news & editorials

  1. 22.09.2021
    22.09.2021
    by      In
    Leussink, the exclusive Australian distributor of Demmeler 3D Welding table solutions, has expanded its range with the new Demmeler WeldSpace system, a fully equipped welding cell with a built-in welding cobot.
    Leussink’s Managing Director Jason Leussink says the new Demmeler WeldSpace system is... Read More
  2. 22.09.2021
    22.09.2021
    by      In
    In a $600,000 research partnership between AML3D Limited and Deakin University, supported through the Innovative Manufacturing Cooperative Research Centre (IMCRC), experts are developing high strength aluminium – scandium welding wire for Wire Additive Manufacturing (WAM®) applications.
    AML3D, a... Read More
  3. 22.09.2021
    22.09.2021
    by      In
    New Elesa stainless steel hinges in AISI 304 grade join the company’s existing ranges in both 304 and 316 grades, offering high strength for heavy doors as well as excellent corrosion resistance.
    These are especially suited to enclosure installations in arduous environments, such as pharmaceutical... Read More
  4. 20.09.2021
    20.09.2021
    by      In
    Lateral restraint blocks made of an engineering plastic that typically retains most of its strength over 100 years are being produced by Hercules Engineering to safeguard suburban and highway concrete bridges against earthquakes and radical structural movement.
    The custom-fabricated high density... Read More
Products
Suppliers