none
none

LOW COST USB POWERED DATA ACQUISITION SYSTEM FROM BESTECH

20-08-2015
by 
in 

The 3340 G-Logger is a low-cost, USB-powered portable data acquisition system with powerful FFT analysis and display capabilities typically found in other much more expensive systems.

The three-channel 3340 offered by Bestech Australia is designed to optimize the low-noise performance characteristics of single and triaxial variable capacitance MEMS accelerometer modules with analog output and 8-32 VDC excitation.

The G-Logger offers 16-bit data acquisition, with data rates of 1 to 10k samples per second and per axis, through each of its available input channels. 

Silicon Designs’ G-Logger has simple and intuitive user interface that is built on an NI LabVIEW® platform for ease of customer use.

The model 3340 also features real-time data acquisition and readout capabilities with live streaming; real-time pause, scroll back and rewind; SD-card recording of up to 32 GB, multi-speed recording playback; and remote operation via TCP. Average system setup time is less than five minutes. 

Optional offset settings allow for a staggered display without overlap.

An additional independent scale G/Div is available per channel, with settings that can shrink or expand channel input for better visibility.

Data output is displayed over a time range from 100 ms to two minutes. 3340 accelerometer data logger allows for simple G readings, with real-time ability to hide or show any or all of the three measurement channels.

Users may view accelerometer performance data from any remote network location.

The 3340 can run off internal battery power in standalone mode, as well as external power of various sources: back up power packs, AC power, or even some solar power systems.  

Data acquisitions can be started and stopped with button presses and/or a customizable schedule.

The 3340 may also be configured to collect information on peak events. 

Users may retrieve a list of peak events and then view the event data in any of the display modes.   

The 3340 has the option to add a GPS module and can be configured to collect GPS data along with accelerometer data.  

Each G-Logger is shipped preconfigured with all necessary Silicon Designs accelerometer specifications, along with accompanying software.

Additional accelerometer power is not required. Software is fully compatible with Windows XP, Vista, 7, & 8 PCs, laptops, and notebooks.

Contact Bestech for more information.

 

Bestech Australia

Ph: 03 9540 5117

www.bestech.com.au

Related news & editorials

  1. 20.02.2018
    20.02.2018
    by      In
    Turck has developed a novel protocol that enables high-density networking with I/O resource constrained PLCs. The Backplane Ethernet Extension Protocol (BEEP) can be used to network up to 33 devices and link them to a PLC on a single connection using a single IP address.
    The first device in the I/O... Read More
  2. 20.02.2018
    20.02.2018
    by      In
    Ham and salami producer D’Orsogna is expanding its business on the east coast, opening a $41 million facility in Melbourne’s north.
    In what was one of the biggest industrial deals in Melbourne in 2017, D’Orsogna has signed up to build a 10,858-square-metre manufacturing plant on 3 hectares at... Read More
  3. 20.02.2018
    20.02.2018
    by      In
    Satellite communications company Myriota is set to open an Internet of Things laboratory to help meet the demand for its technology.
    The $2.72 million laboratory will be located in the CBD of Adelaide to allow the company to integrate its ultra-low-cost satellite IoT solution into a wide range of... Read More
  4. 20.02.2018
    20.02.2018
    by      In
    After almost a century, the UK’s most iconic tool brand has arrived in Australia. Hartech Tools has been appointed the exclusive Australian wholesale distributor to launch and build Draper Tools in the Australian marketplace.
    Draper Tools was started in 1919 when the founder, Bert Draper, sold... Read More