none

LINEAR MOTORS FOR TUBULAR RESULTS

20-07-2020
by 
in 

Factory operators looking to save energy and costs should look no further than compressed air.

Some sites spend up to 30 per cent of their electricity bill generating compressed air, which is highly useful in many industrial applications.

Pneumatic actuators run on compressed air, and have been around since World War II. They are well-understood, inexpensive and suited to harsh environments. However, they also come with a penalty: compressed air must be generated to power them.

Depending on the expansiveness of a factory, this can mean numerous compressors and/or a complicated reticulation system. A reliable level of pressure must be maintained or pneumatics will work poorly or not at all.

Air leaks can be expensive. According to a leading compressor technology company, one leak in one unit costing 15 cents/kW/hr to operate will represent well over $2,000 a year to a power bill.

With a single point of failure – for example air leakage at one location – the air pressure of the whole plant will drop, and operations will be affected.

Then there is the noise.

“If you are working in or visiting a factory, you will usually hear a lot of noise,” explains Heng Luo, product manager at ANCA Motion.

“And that’s one big advantage servo-controlled linear motors have against pneumatics.”

Linear motors – for example screw-drive and tubular linear kinds – are newer than pneumatic or hydraulic options, but are preferred for certain applications. Instead of a piston in a cylinder, driven by compressed air or an incompressible fluid, tubular linear motors use magnetic flux to create motion. They aren’t as cheap in upfront costs compared to pneumatics, but offer vast benefits in aspects including accuracy, cheaper operating costs and flexibility.

Pneumatics can move quickly and forcefully from one point to another (and hydraulics quicker and more forcefully still, for the same size) but with little positional control along the stroke.

ANCA Motion’s LinX M-Series offers 10 micrometre resolution as well as velocity up to 10 metres per second and maximum acceleration over 30G. The M-Series comes with an integrated position sensor, with precise positional control.

It can also achieve a continuous force of 90-160 Newtons and a peak force of 1,200 Newtons.

An estimated payback period versus pneumatic cylinders, which with their form factory and mounting design the M-Series is a neat substitute for, is only 18 months.

One area of obvious advantage over pneumatics is the ease of reprogramming between jobs.

A recent application for a customer’s forming machine substituted LinX motors for pneumatics to move a cutting bed. Changes for different workpiece lengths could take six to eight hours for the painstaking recalibration of air pressure. Such adjustments now are a quick change in servo drive parameters – a matter of seconds. The improved positional control has boosted throughput by 50 per cent, with the massively improved precision allowing the process to be confidently sped up.

ANCA Motion’s linear motors were originally developed for sister company ANCA CNC Machines’ FX Linear and MX Linear tool and cutter grinder machines. ANCA is a leader in CNC tool grinding technology, with a series of world firsts since beginning in 1974.

The M-Series has been developed within a culture of world-class engineering, developing machine tools where micron-level precision is essential.

The LinX M-Series Tubular Linear Motor has a failure rate of less than 0.03 per cent.

Robust support is offered through an international network of 125 engineers in strategic locations. To learn more about the LinX M-Series, visit the ANCA Motion website at https://motion.anca.com/

ANCA CNC Machines
03 9751 8900
https://motion.anca.com/

Related news & editorials

  1. 24.11.2020
    24.11.2020
    by      In
    The highly anticipated Electronic Flow Controller is here.
    It’s different from the Cordis Pressure Controller, as the Flow Controller utilizes an extremely fast reacting mems technology sensor upstream of Clippard’s proportional valve.
    Adding the optional DR-2 Regulator for accurate and precise... Read More
  2. 24.11.2020
    24.11.2020
    by      In
    Backplane Systems Technology is proud to present Aplex’s APC-3072 and APC-3073 Rugged Aluminium Front Bezel Design In-Vehicle Panel PC Solution.
    The APC-3072 comes with Intel Atom E3845 and APC-3073 comes with Freescale ARM Cortex A9 i.MX6 Dual Lite processors.
    The aluminium front bezel design... Read More
  3. 24.11.2020
    24.11.2020
    by      In
    If you use spray bars as part of your operations, you’ll understand how time consuming and inconvenient it can be to unclog, clean and maintain the spray nozzles.
    This is about to change with the introduction of a new range of Mini Quick-Fit Nozzles, from Italian nozzle manufacturer PNR.
    The design... Read More
  4. All in one AI chip prototype
    18.11.2020
    18.11.2020
    by      In
    A prototype for a new all-in-one AI device has been developed which brings together into one chip;  artificial intelligence technology, with imaging, processing, machine learning and memory; powered by light.
    The researchers say the all-in-one AI chip is inspired by nature’s greatest computing... Read More