none

LATEST ENERGY EFFICIENT LIGHTING TECHNOLOGY FROM STAHL

10-03-2016
by 
in 

Energy-efficient general lighting retrofits in any climate are straightforward with the new series of linear luminaires from R. STAHL.

Despite a familiar appearance due to their tried-and-tested fitting design, R. STAHL 6002 and 6402 series linear luminaires use the latest LED technology inside.

Suitable for ceiling installation, use as pendant lights, or pole mounting, these explosion-proof devices enable particularly energy-efficient general lighting in zones 1, 21, 2 and 22.

Their familiar form factor ensures that changing over from traditional linear luminaires with fluorescent tubes to LED light sources is an especially straightforward process.

In photometric terms, one 52 W luminaire is fully equivalent to two conventional 36 W fluorescent lamps. However, up to 100,000 hours of operation mean they achieve a far superior service life, as well as a high luminous flux of up to 5800 lm and excellent luminaire efficiency of well over 100 lm per W.

In addition, thanks to their slim, low-profile GRP housing, the lights weigh at least one third less than widely available competing products in the same class. Series 6002 models feature "increased safety" (Ex e) type of protection, while 6402 series luminaires are "non-sparking" (Ex nA).

Notable for their very robust IP66/IP67 design, the products can be used at environmental temperatures ranging from -30°C to +55°C.

Both series feature very economical 28 W or 52 W standard versions. They are available with or without diffusers in lengths of 700 mm and 1310 mm.

The current R. STAHL lighting solutions campaign provides instructive information on all crucial benefits of LED lighting compared with conventional light.

For more information visit: www.stahl-explorers.com

Related news & editorials

  1. 13.07.2018
    13.07.2018
    by      In
    RS Components has added a compact low-cost high-performance infra-red temperature sensor to its RS Pro range. At just 31mm diameter by 30mm high with a side-entry cable the sensor is ideal for mounting in machines where space is tight.
    The noncontact infra-red sensor is ideal in applications where... Read More
  2. 13.07.2018
    13.07.2018
    by      In
    Rated for Class 1 clean room use, Treotham’s highly flexible networking cables from Cicoil are free from halogens, do not shed surface particulates, are ideal for cryogenic environments and are excellent for use in semiconductor manufacturing equipment applications. In addition, the contamination-... Read More
  3. 11.07.2018
    11.07.2018
    by      In
    GEMÜ has developed a novel sealing method without O-rings for its iComLine range of modular valve block solutions. It involves two synchronised contours that fit precisely together to ensure lasting, reliable sealing.
    The newly developed sealing concept without O-rings not only saves the additional... Read More
  4. 11.07.2018
    11.07.2018
    by      In
    Syspro reckons it is paving the way for digital transformation by embracing IoT and AI-infused technology in the latest release of its enterprise resource planning (ERP) software.
    The new release is aimed specifically at distributors and manufacturers. It leverages Industry 4.0 automation and data... Read More