none

Keeping your cool with Exair ETC

19-04-2011
by 
in 

Exair’s digital ETC (Electronic Temperature Control) Cabinet Cooler System keeps electrical enclosures cool while minimizing compressed air use. 

Independent laboratory tests now certify that the ETC is CE compliant to assure safe operation in a wide range of cooling applications, allowing it to work perfectly with our CE compliant Cabinet Cooler units.

The ETC accurately maintains a constant temperature in the electrical enclosure that is slightly under the maximum rating of the electronics. It permits just enough cooling for the electronics without going so cold as to waste compressed air. 

A digital LED readout displays the temperature of the electrical enclosure (°F or °C), then displays the user temperature setting when pressing the “push to set” button. When that setting is exceeded, the Cabinet Cooler System is activated, which circulates -7°C (20°F) air throughout the electrical enclosure to prevent a high temperature malfunction.

The ETC is suitable for NEMA 4, 4X and 12 environments with a strong polycarbonate plastic housing and sealed membrane push button control. 

All systems include an automatic drain filter separator to keep moisture in the compressed air out of the electrical enclosure. 

Models for 120 VAC or 240 VAC are available with cooling capacities up to 2800 Btu/hr.  Applications include cooling programmable controllers, CNC panels, computer cabinets and variable speed drives.
 
Compressed Air Australia Pty Ltd
Ph: 1300 787 688
http://caa.exair.com

Related news & editorials

  1. 16.03.2018
    16.03.2018
    by      In
    In the 1960s, as much as a quarter of Australia’s workforce was employed in the manufacturing sector, and the industry fuelled 25% of the nation’s economy, according to the Productivity Commission. Half a century on, the closure of Toyota, Ford and then General Motors in October 2017 seemed to... Read More
  2. 24.01.2018
    24.01.2018
    by      In
    According to Southern Cross CEO, Mark Ferguson, if Australian industry really wants to get serious about saving energy then it needs to take a close look at ‘two-stage’, air compressor technology. As energy costs continue to outstrip other business input expenses it is critical, more than ever... Read More
  3. Martin Chappell
    03.11.2017
    03.11.2017
    by      In
    With Australia’s manufacturing industry strengthening, leaders and heads of IT are weighing up which new technologies they should implement to gain a competitive edge. Martin Chappell from Motorola Solutions explains how a simpler and more focused use of data can be the best approach.
    Australia’s... Read More
  4. Sahara Force India F1
    29.08.2017
    29.08.2017
    by      In
    The pace of Formula One (F1) development is rivalled only by the speeds achieved on the racetrack. Each time the Sahara Force India F1 Team brings its car to a circuit, it represents the team’s top engineering; every time the team leaves, the car is just a baseline. Between races it must be... Read More