Rain
20 °C
Seattle, Washington
Rain

Wed Jun 26 2019
none

ISOLATED SIGNAL SPLITTERS FOR A RANGE OF APPLICATIONS

28-03-2019
by 
in 

Acromag’s SP330 series of isolated signal splitter/duplicators, available in Australia through Metromatics, is designed to accommodate a wide range of applications. Very similar to the recently introduced SP230 loop-powered 2-wire series, these 4-wire DC-powered models are also software-configurable for precise conditioning of current, voltage or temperature input signals.

The SP330 splitters provide two isolated outputs, proportional to a single input, with a choice of process control signal formats: 0-20mA, 4-20mA, 0-5V, 0-10V, ±5V, or ±10V.

A standard USB port connects the splitter to a PC or Android device with Acromag’s free software for easy selection and scaling of I/O ranges. Power sources from 6 to 32V DC are supported and can connect at the terminals, to a power bus along the DIN rail, or at both locations for redundancy.

The splitters operate reliably from -40 to +75°C with high immunity to electrical noise and surge protection. Ul/cUL Class 1 Division 2, ATEX Zone 2 and IECex hazardous location approvals are pending.

Metromatics
07 3868 4255
www.metromatics.com.au

Related news & editorials

  1. 27.06.2019
    27.06.2019
    by      In
    Linear guides in robotics systems must withstand extreme loads. In order to detect early wear of its sliding lubrication-free bearings made of high-performance plastics and to plan the maintenance in advance, igus has developed a new smart system for its drylin linear systems.
    The system measures... Read More
  2. 27.06.2019
    27.06.2019
    by      In
    In construction equipment, agricultural machines and offshore installations, bearings often have to cope with extreme conditions, so dirt-resistant components and durable materials are needed. igus has now upgraded its iglidur Q2E heavy-duty bearing to close the gap between existing bearings and... Read More
  3. 27.06.2019
    27.06.2019
    by      In
    Coolant recycling machine manufacturer Freddy has recently launched an oil and coolant bowser, which is an easy and safe way to transport fresh coolant around a workshop for filling or top up of CNC machines. The bowser is the latest addition to the company’s comprehensive range of industrial... Read More
  4. 25.06.2019
    25.06.2019
    by      In
    Previously, spray bars required pre-fabrication, such as welding, prior to installation and, once installed, adjusting the spray or adding additional nozzles was difficult. But an innovative new product has simplified the whole process.
    ZPN Mini Pipe Clamps, designed and made in Italy and available... Read More