Pressure transmitters are used to measure the pressure of liquids, fluids and gases in the processing industry. Also known as pressure transducers, these instruments do more than just check the pressure of the working equipment. 

Three Interesting Uses of Pressure Measurement Devices

Level Measurement Applications
This is one of the most interesting uses of the pressure transducers.

The pressure sensors can be used to measure the level of liquid in a container. If using a pressure transducer for a level measurement, the precise capacity of the container should be known, as well as the specific fluid gravity. This is due to the readings being influenced by the fluid gravity. 

The high gravity fluids will influence the pressure reading per cubic inch of the fluids. Low gravity fluids, however, will have minimal impact of the reading. Size of a container will help in deciding the total volume of the container, making pressure calculation easier. By doing so, the total pressure exerted on the container can be easily calculated.

Today, pressure transducers, which are specially designed for level measurement tasks, are easily found. For instance, differential pressure transmitters are used by many companies to measure level measurement of their fluid tanks.

It is very important to keep in mind that this is not a direct level measurement method, but an inferential technique. This method can be paired with other established techniques for better results.

Flow Measurement
There are several flow measurement devices used to measure the flow of fluid in the process industries. For example, flowmeter is one such instrument, which is used to measure the rate of some specific fluids. Pressure transducers, however, can also be used as an alternative flow measurement device.

This is done by placing the transducers on both sides of a constricted pipe section. The method helps measure the drop or rise of the flow with its increment or decrement. Also, this flow measurement closely matches the working of differential pressure flow meters.

It is important to note that a repurposed pressure transmitter can only become an alternative if you wish to experiment with other styles of flow measurement.

Filtration System Monitoring
The pressure transducer is used to monitor the pressure of the filtration system. Most filtration systems retain contaminants or debris from liquid, or gas, which are filtered in them. With time, this affects the performance of the filter. Accumulated contaminants may block the flow of fluid or even contaminants to seep through the filter.

There are various applications where impurities cannot be allowed to pass through the filtration system. In such systems, pressure transducers can be used to monitor the pressure level in the section of pipe, which lies beyond the filtration system. By noticing a gradual pressure drop, you can understand how blocked or degraded the filtration systems are.

All the above-mentioned uses are very typical, and still not in practice. It is always recommended consulting a pressure transmitter expert to understand how different pressure transmitters will help in your process. 




    With the surge in consumer demand for more and more sustainable products, Tente Castors & Wheels have developed the Anika Evo twin wheel castor.
    The Anika Evo is made from castor oil and castor seeds, sourced from the world’s...
  2. Mexico is a land of delightful extremes for RV enthusiasts. Both local adventurers and overseas visitors are attracted to its 9,000km (5,800 miles) of coastline, soaring mountainous regions, with peaks up to 5,600m (18,400 ft) – and arid and wild areas celebrating Mexico’s unique cultural fusion of...
  3. A new formulation of high-strength grout that can simplify and reduce the costs of a range of frequent concrete construction and contractor jobs is being introduced to Australia and New Zealand by long-established bearing manufacturer Hercules Engineering.
    Its new Hercules Non-Shrink Grout HSB 510X...