Clear sky
25 °C
Bridgeport, Connecticut
Clear sky

Sun Jul 21 2019
none

HORNS AND BEACONS BRING FIRE ALARMS TO HAZARDOUS AREAS

25-07-2018
by 
in 

Available now from Mechtric, the D2x family of beacons and combined alarm horn/beacon units from E2S Warning Signals are compliant to UL464 and UL1638/UL1971 for public mode fire alarm installation as emergency signalling devices for the hearing impaired, as well as private mode fire and general signalling applications in hazardous locations.

All versions feature innovative electronics that automatically synchronise multiple beacons on the same circuit without the need for additional modules to reduce overall system cost and installation time.

The D2x1BLD2-H uses an array of high power Cree LEDs, orientated to optimise visibility in any direction. The D2xB1XH1 5J xenon strobe beacon and the D2xB1XH2 10J xenon strobe beacon both offer exceptionally low inrush and operating currents that optimise cable selection and reduce power supply requirements.

The D2x units carry global approvals: UL/cUL for Class I Div 2, Class II Div 2, Class I Zone 2/22 and IECEx and ATEX certification for Zone 2 and 22 hazardous area applications. For complete audio-visual notification the D2xC2LD2-H combination unit provides the ultimate in fire signalling.

A sound output of up to 116dB(A), 64 alarm tone frequencies and four remotely selectable stages/channels ensures that the UL464 alarm horn can provide safe signalling for multiple scenarios from one device. The UL1971 LED beacon can be linked internally to the alarm horn to minimise cabling requirements and reduce installation time.

Under UL1971 Public Mode test conditions, the D2xB1LD2-H beacon produces an output of 38.38cd, the D2xB1XH1 xenon strobe outputs 18.18cd and the D2xB1XH2 xenon strobe achieves 70.29cd, making them the brightest hazardous location fire signals available.

All versions are housed in marine-grade aluminium enclosures with IP66 ingress protection (NEMA Type 4 and 4X) providing protection in the harshest of environments.

Mechtric
1800 252 995
www.mechtric.com.au

Related news & editorials

  1. 19.07.2019
    19.07.2019
    by      In
    Requirements from clients have resulted in the production of 1 x 1m Vesconite Hilube polymer wear plates measuring 25mm and, more recently, 40mm in thickness.
    Vesconite Bearings’ technical sales consultant Eddie Swanepoel has been instrumental in translating clients’ requirements into new extruded... Read More
  2. 19.07.2019
    19.07.2019
    by      In
    The way to a ready-to-connect e-chain is now even quicker and easier with the new online igus e-chain expert. With the aid of this free and accessible online tool, users can design their e-chain systems using a smart phone, tablet or computer. Whether an unsupported, gliding or hanging application... Read More
  3. 19.07.2019
    19.07.2019
    by      In
    Machine or equipment failure causes a lot of trouble for operators: packaging equipment comes to a standstill or a wind turbine no longer turns. igus has therefore developed the world’s first intelligent plain bearing, which detects wear in extremely stressful applications in advance and sends a... Read More
  4. 19.07.2019
    19.07.2019
    by      In
    Deep drilling rigs with top drive systems are used in the oil and gas industry. To guide cables in these systems, manufacturers and operators have so far been using so-called ‘service loops’. However, these often create problems: the cables have no guidance or defined bend radius, and can slip into... Read More