none

HIGH TEMPERATURE STORAGE STABILISES RENEWABLES

08-02-2017
by 
in 
1414 Degrees Executive Chairman Dr Kevin Moriarty (right) with Executive Director & Chief Technical Officer Matthew Johnson.

Solving the challenge of efficient energy storage is key to ensuring the viability of renewable energy generation.

An Australian company is tackling this problem, utilising one of the most abundant elements on earth to create an energy storage system that can store electricity, and heat homes as a useful side-effect.

South Australian company 1414 Degrees (named after the melting point of silicon) has developed technology to store electricity as thermal energy by heating and melting containers full of silicon at a cost estimated to be up to 10 times cheaper than lithium batteries.

Silicon is the second most abundant element in the earth’s crust, after oxygen.

A tonne of silicon can store enough energy to power 28 houses for a day.

Its high latent heat capacity and high melting temperature (1414 C) – make it ideal for the storage of large amounts of energy.

The process also generates large amounts of clean useable heat, which can easily be utilised for district heating or industrial purposes.

1414 Degrees has created a full prototype ready for commercialisation in Adelaide, South Australia, of its patented thermal energy storage system (TESS).

It is now scaling up its technology to grid scale thermal energy storage systems with potential to dramatically improve the efficiency of wind and solar farms and will launch the first commercial machines this year.

1414 Degrees Chairman Dr Kevin Moriarty said the company was waiting for AusIndustry, a division of the Federal Department of Industry, Innovation and Science, to sign-off on the 10MWh project in February so manufacture could begin.

As well as its ability to stabilise South Australia’s electricity supply, which relies heavily on wind power, the system is likely to appeal to northern European countries because of its ability to store the wind energy of a cold Scandinavian night while keeping residents warm and running their computers the next day.

“It’s low cost for very large energy storage,” Dr Moriarty said.

“The big problem with renewables is this need to shift the peak – we’ve got wind turbines roaring away at 3am in South Australia when nobody needs the power.

The TESS device stores electricity as thermal energy by heating and melting containers full of silicon at a cost estimated to be up to 10 times cheaper than lithium batteries. The high latent heat capacity and melting temperature of silicon – 1414 C – make it ideal for the storage of large amounts of energy.

1414 Degrees has calculated that it can install sufficient storage, capable of supplying hundreds of MW of electricity, at just $70,000 per MWh to provide for a reliable electricity supply with up to 90 per cent renewable sources.

Dr Moriarty said a site had been chosen in South Australia for the first 10MWh system. He said the systems also produced a lot of useable, clean heat, making them ideal for industry, district heating in the northern hemisphere and food processors.

“The idea will be to position these things near industry or get industry to move near to the very big units because it will be able to offer very clean, cheap heat.

“We don’t have any dirty emissions like you do from gas or coal so basically the heat comes out as hot air and can be used for all sorts of things.

“Also, you can keep using the silicon, it’s pretty much unlimited.”

The company, previously known as Latent Heat Storage, aims to initially assemble the units at the Tonsley Innovation Hub in Adelaide and have its first 10MWh system operating by mid-year.

South Australia leads the nation in the uptake of wind energy and roof-top solar with renewable sources accounting for more than 40 per cent of the electricity generated in the state.

However, the intermittent nature of renewable energy has been the cause of intense debate in Australia in recent months.

“I think we’re in the ideal place in South Australia because there’s a demonstrable need here,” Dr Moriarty said.

“We have a huge amount of renewable energy being wasted because they can’t match wind generation with the need.

“If we can demonstrate we can do that and do it cheaply then it’s going to change a lot of the economics and the reliability.”

Australian CleanTech Managing Director John O’Brien said energy storage would undoubtedly be a very significant part of the energy system as nations moved towards low (or zero) carbon targets in the next decade or two.

He said the relatively cheap price of silicon and its ability to be used over and over would help keep the overall lifecycle price down.

“Clearly the sun doesn’t shine at night and the wind doesn’t blow all of the time so we have to think a bit more carefully about how we manage it.”

Related news & editorials

  1. 23.05.2018
    23.05.2018
    by      In
    International industry leaders in renewable energy and storage are meeting in Adelaide for the 2018 Australian Energy Storage Conference and Exhibition.
    Sam Staples, AES Sales Manager and Conference Programme Manager, said South Australia’s ongoing work in the renewable energy sector makes it the... Read More
  2. 22.05.2018
    22.05.2018
    by      In
    The Sixth Wave Alliance (SWA) is a new initiative formed to develop a national robotics R&D strategy and create the critical mass required to address large-scale Australian and international challenges using robotics technologies.
    With worldwide spending on robotics expected to reach US$188... Read More
  3. 21.05.2018
    21.05.2018
    by      In
    Queensland engineering firm Fibercon is claiming a milestone in recycling, having reused more than 50 tonnes of plastic waste.
    The plastic has been used in the company’s Emesh product, which replaces steel mesh in reinforced concrete. The technology was codeveloped with researchers from Queensland’... Read More
  4. 18.05.2018
    18.05.2018
    by      In
    The latest edition of the Methods technology and solutions e-zine from Mouser Electronics focuses on digital twinning, the latest concept for design and maintenance in Industry 4.0.
    Starting with a forward from digital twinning expert Dr Michael Grieves, Executive Director of the US Center for... Read More