none

HANDHELD ENCLOSURES TAKE THE STRAIN OUT OF MACHINE CONTROL

02-03-2020
by 
in 

Hammond Electronics has a new family of handheld enclosures that are designed for ergonomic use in applications such as machine controllers or electric hoist controls.

Initially available in six different sizes, the IP54 rated UL94-V0 flame-retardant ABS 1552 family of enclosures are designed to fit comfortably into the hand, enabling them to be used for long periods of time without strain.

The end panels are removable for easy modification, and for use with flying cables, an alternative end panel with an integral rubberised cord protector and a strain relief bracket is available. An optional wall mounted holder allows the unit to be stored in a convenient location when not in use.

The 1552 can also be used as a desktop enclosure.

All units are 50mm wide and either 22 or 30mm high, with both heights available in lengths of 70, 110 and 150mm. All sizes are available as standard in black and grey with a satin texture.

A recess for a membrane keyboard or a display is moulded in the top face and PCB standoffs are moulded in the base section. The top is secured to the base with four self-tapping colour-coded screws; snap closures are fitted to the centre of the longer units to prevent bowing.

Hammond Electronics
08 8240 2244
www.hammondmfg.com

Related news & editorials

  1. 17.09.2020
    17.09.2020
    by      In
    ICP Australia is proud to introduce ICP DAS’ NSM-206PFC 4-port 10/100 Mbps PoE(PSE) Ethernet Switch with 2 Fiber Ports (Multi-mode, SC Connector).
     The NSM-206PFC is a 6-port unmanaged Ethernet switch supporting Power-over-Ethernet on ports 1 to 4.
     The switch is classified as power source... Read More
  2. 17.09.2020
    17.09.2020
    by      In
    With a rugged, mechanical design and a whole host of on-board variables, the Control Devices CDJ420 series joystick can deliver sound performance in a wide variety of applications.
    The CDJ420 is available in single and dual axis configurations and features multiple ergonomic grips and custom switch... Read More
  3. 16.09.2020
    16.09.2020
    by      In
    Sydney’s 67-storey MLC tower has upgraded a series of switchboards, to ensure continued reliable supply as tenant power requirements continue to change and accelerate.
     Lead electrical contractor on the MLC upgrade project, Barnwell Cambridge, chose Australian-manufactured Fuji SMBE Macquarie... Read More
  4. 15.09.2020
    15.09.2020
    by      In
    Instrumentation specialist VEGA Australia is standing on the strength of its expertise and expanded a capability to extract critical information.
    The three areas that VEGA is involved in are level, pressure and density measurement. Now the company is not only producing information in each of those... Read More