none

Gorman-Rupp pumps make life easy for owners and installers

27-07-2010
by 
in 

The Gorman-Rupp rotary gear pump is the easiest gear pump to install and the easiest gear pump to maintain, according to Australian distributors, Hydro Innovations.

This makes the pumps especially popular with installation contractors and equipment owners, who can expect lower maintenance costs over the life of the pumps.

The Gorman-Rupp G series pump is available in medium, heavy and extreme duty options.

These pumps can tackle a wide range of applications because of the vast range of materials and sealing options available.

But Hydro Innovations spokesperson Sean Currie, says there is more to the pump than being a great “applications solver”.

Being able to adjust pump height and having multiple port options has the potential to save substantially on installation costs, Mr Currie says. And equipment owners will also get cost savings benefits.

This is because the pump has many features to extend component life (like the unique idler pin lubrication system and internal seal pressure vent).

Also, parts costs will be lower. But when service is needed, the pumps are much easier to service than other viscous liquids pumps.

For example, a double piloted design ensures simple and precise rotor adjustment, a back pull-out design allows service and maintenance without disconnecting pump housing from piping, and a “no-leak” pressure relief valve allows pressure relief valve setting without leakage of high temperature or corrosive fluids.  

Gorman-Rupp gear pumps will handle fluids form fuels to food oils, from acids to meat products and viscous silicones to thin solvents.

Hydro Innovations
Ph: 02 9647 2700
www.hydroinnovations.com.au

Related news & editorials

  1. 16.03.2018
    16.03.2018
    by      In
    In the 1960s, as much as a quarter of Australia’s workforce was employed in the manufacturing sector, and the industry fuelled 25% of the nation’s economy, according to the Productivity Commission. Half a century on, the closure of Toyota, Ford and then General Motors in October 2017 seemed to... Read More
  2. 24.01.2018
    24.01.2018
    by      In
    According to Southern Cross CEO, Mark Ferguson, if Australian industry really wants to get serious about saving energy then it needs to take a close look at ‘two-stage’, air compressor technology. As energy costs continue to outstrip other business input expenses it is critical, more than ever... Read More
  3. Martin Chappell
    03.11.2017
    03.11.2017
    by      In
    With Australia’s manufacturing industry strengthening, leaders and heads of IT are weighing up which new technologies they should implement to gain a competitive edge. Martin Chappell from Motorola Solutions explains how a simpler and more focused use of data can be the best approach.
    Australia’s... Read More
  4. Sahara Force India F1
    29.08.2017
    29.08.2017
    by      In
    The pace of Formula One (F1) development is rivalled only by the speeds achieved on the racetrack. Each time the Sahara Force India F1 Team brings its car to a circuit, it represents the team’s top engineering; every time the team leaves, the car is just a baseline. Between races it must be... Read More