none

Get smart: use Clever Multimach valves

09-06-2010
by 
in 

Metal Work Pneumatic has released its new Clever Multimach valves, which can be used to form autonomous and intelligent valve island subsystems.

Each valve has a microchip that checks the system and detects electrical faults and a LED diagnostic system that identifies immediately whether a pilot is energized, the contact is interrupted or there is a short circuit.

Addressing of single outputs is not required as the connection number of each solenoid pilot is assigned automatically based on the position occupied by the valve.

Clever Multimach terminals can have a maximum of 32 solenoid coils (32 single solenoid valves) with 32 inputs attached. Valves with 4, 6 and 8 mm. fittings can be combined on the same valve terminal and if required each valve can have an individual compressed air supply.

Metal Work Pneumatic
Ph: 03 9706 6718
www.metalwork.com.au

Related news & editorials

  1. 18.07.2018
    18.07.2018
    by      In
    3D printing with metals is affecting the way manufacturing occurs, and Australian distributor Raymax Applications reckons this is amply demonstrated by the application of SLM Solutions machines in metal manufacturing processes.
    SLM Solutions Group recently released its fourth generation 280 system... Read More
  2. 16.03.2018
    16.03.2018
    by      In
    In the 1960s, as much as a quarter of Australia’s workforce was employed in the manufacturing sector, and the industry fuelled 25% of the nation’s economy, according to the Productivity Commission. Half a century on, the closure of Toyota, Ford and then General Motors in October 2017 seemed to... Read More
  3. 24.01.2018
    24.01.2018
    by      In
    According to Southern Cross CEO, Mark Ferguson, if Australian industry really wants to get serious about saving energy then it needs to take a close look at ‘two-stage’, air compressor technology. As energy costs continue to outstrip other business input expenses it is critical, more than ever... Read More
  4. Martin Chappell
    03.11.2017
    03.11.2017
    by      In
    With Australia’s manufacturing industry strengthening, leaders and heads of IT are weighing up which new technologies they should implement to gain a competitive edge. Martin Chappell from Motorola Solutions explains how a simpler and more focused use of data can be the best approach.
    Australia’s... Read More