Published 17-09-2020
| Article appears in October 2020 Issue

Fuji SMBE Switchboards power MLC Centre


Sydney’s 67-storey MLC tower has upgraded a series of switchboards, to ensure continued reliable supply as tenant power requirements continue to change and accelerate.

 Lead electrical contractor on the MLC upgrade project, Barnwell Cambridge, chose Australian-manufactured Fuji SMBE Macquarie switchboards due to their reliability and modular construction.

 “We were contracted to replace the main switchboards, generator switchboards and PLC switchboards, and they needed to suit the tight confines and unusual shape of the room,” explained Mr Peter Silsby, Director, Fuji SMBE Macquarie.

 “The existing switchboards had been operating reliably for years, but as more and more tenants moved in, and electronic needs continued to change and advance, MLC was forward-thinking enough to look at the future and make sure reliable supply, as well as back-up power, was always available,” said Mr Silsby.

 “New switchboard technology has the ability to monitor every circuit via a high level modbus interface utilising the latest Schneider Micrologic 5.3E circuit-breakers, which provides benefits to building and facility managers, as well as tenants,” he said.

 “There were installation challenges, with components having to go through a load-limited goods lift, and the switchboards reassembled inside the switch room. It took a lot of cooperation between stakeholders for it all to come together successfully.”

Compact, modular switchboards

 Fuji SMBE Macquarie specified its iNTELECT™G3 switchboard systems, because they are compact and modular, allowing them to be reassembled on site.

 The iNTELECT™G3 system is the 3rd generation of the company’s iNTELECT system, and it has been engineered in Australia for Australian conditions. Major advantages over previous technologies include adaptability, versatility, safety, strength, and compact size.

 “MLC’s Switchboard components were unloaded in the loading dock and Barnwell Cambridge used specialised hydraulic furniture movers that fix to each side of the switchboard tier. This meant that they could be moved safely and efficiently to the appropriate rooms on levels 4, 26 and 54, ready for reassembly,” said Mr Silsby.

 A staged approach

To safely and efficiently remove all the old switchboards and install the new ones – with minimal disruption to the building’s tenants and visitors – a staged approach was adopted.

 Firstly, the old switchboards were disassembled and removed in sections. Then the new ones were loaded into the appropriate rooms where they were reassembled on site by Fuji SMBE Macquarie’s qualified technicians.

 “We’d like to acknowledge the vital assistance of the team at ER&D Consulting Engineers, who provided a comprehensive specification detailing the existing installation and exactly what was required in the new switchboards,” said Mr Silsby.

 “Another key supplier was Schneider Electric, who supplied reliable, proven circuit-breakers for the switchboards. The collaboration between all companies involved in this project was world class,” he said.

 Project success leads to further work

 The MLC switchboard upgrade project was successfully completed on-time and on-budget, with all stakeholders working seamlessly together to deliver the best outcomes.

 The project was such a success that MLC has decided to use Fuji SMBE Macquarie switchboards on two further ongoing upgrades – their high voltage and retail centre upgrades.

 “To be rewarded with further work straight away is a testament to the hard work of our entire team, and the other stakeholders in this upgrade project. We’re delighted that MLC was happy with the job, as well as confident that we could deliver further favourable results in the future,” said Mr Silsby.

 Fuji SMBE Macquarie


  1. The quality of a bottle of wine is determined by both the quality control of the grape and the method used during the winemaking process. 
    The quality of the grape is mostly determined by natural and geological factors, such as weather conditions and location. Because that’s hard for humans to...
  2. Since at least the 1960s, there have been various methods for activating or switching permanent magnets on and off for steel clamping or holding duties.
    Early types generally used Alnico magnet elements. Since the advent of rare earth magnet materials and their progress to mass production in the...
  3. Making sure you’ve got the right work surface is an important consideration when setting up a production facility or a workshop. 
    BAC Systems helps you carefully plan workshop layouts so that you can work the way you want to, fitting everything efficiently in the available space. Part of that...