none
none

FLUKE INFRARED CAMERA NOW WITH MULTISHARP FOCUS

18-03-2016
by 
in 

The new Fluke Ti450 Infrared Camera takes focus to a higher plane with MultiSharp™ Focus.

An out-of-focus thermal image can be off by 20° or more with no way to correct it once it has been captured — short of retaking new images.

The new Fluke® Ti450 Infrared Camera solves this problem by delivering in-focus images of everything in the field of view.  

MultiSharp Focus is a new technology that rapidly takes multiple images focused near to far and combines them to produce one image with all objects in focus. The advanced focusing system lets users capture an automated, in-focus image of all potential targets, delivering the image clarity needed by professional thermographers and maintenance managers to provide better images and avoid costly rework.

MultiSharp Focus is also available as a free upgrade to Fluke’s TiX500, TiX520, and TiX560 Infrared Cameras when owners update the camera’s firmware.

For instant focus on a single target, the high performance 320 x 240 resolution Ti450 features LaserSharp Auto Focus that uses a built-in laser distance meter to calculate and display the distance to the designated target with pinpoint accuracy.

Other auto focus systems may focus on the surrounding landscape or closer targets, compromising focus and the ability to capture accurate temperature measurements.

The SuperResolution mode on the Ti450 increases image resolution to 640 x 480.

This delivers images with four times more pixel data than normal resolution. The higher resolution lets users see even more detail for greater analysis capability and better reporting.

 

Fluke

Ph: 02 8850 3333

www.fluke.com.au

Related news & editorials

  1. 20.02.2018
    20.02.2018
    by      In
    Turck has developed a novel protocol that enables high-density networking with I/O resource constrained PLCs. The Backplane Ethernet Extension Protocol (BEEP) can be used to network up to 33 devices and link them to a PLC on a single connection using a single IP address.
    The first device in the I/O... Read More
  2. 20.02.2018
    20.02.2018
    by      In
    Ham and salami producer D’Orsogna is expanding its business on the east coast, opening a $41 million facility in Melbourne’s north.
    In what was one of the biggest industrial deals in Melbourne in 2017, D’Orsogna has signed up to build a 10,858-square-metre manufacturing plant on 3 hectares at... Read More
  3. 20.02.2018
    20.02.2018
    by      In
    Satellite communications company Myriota is set to open an Internet of Things laboratory to help meet the demand for its technology.
    The $2.72 million laboratory will be located in the CBD of Adelaide to allow the company to integrate its ultra-low-cost satellite IoT solution into a wide range of... Read More
  4. 20.02.2018
    20.02.2018
    by      In
    After almost a century, the UK’s most iconic tool brand has arrived in Australia. Hartech Tools has been appointed the exclusive Australian wholesale distributor to launch and build Draper Tools in the Australian marketplace.
    Draper Tools was started in 1919 when the founder, Bert Draper, sold... Read More