Connection while on the go - D-Link A/NZ New 4G LTE USB Adapter and 4G LTE Cat 6 Wi-Fi Hotspot


Two new products to keep you connected while on the move – the DWM-222 4G LTE USB Adapter and the DWR-933 4G LTE Cat 6 Wi-Fi Hotspot, has been launched by D-Link A/NZ .


By using super-fast 4G LTE technology, you can achieve downlink speeds of up to 150 Mbps and uplink speeds of up to 50 Mbps so you don’t have to slow down when you’re on the move.

The 4G LTE USB Adapter is plugged into the computer to get Internet access anywhere you can receive an LTE signal and it’s also backwards compatible with an HSPA, GSM, GPRS, or EDGE data signal.

The DWM-222 also has an integrated antenna for a connection that is consistent and reliable whether you’re in a coffee shop, attending a business meeting or working from a hotel.

The DWM-222 is a true plug-and-play device with drivers built right into the adaptor, making installation both fast and simple. It can be used on notebooks even without a CD/DVD drive –USB plug port and the drivers install automatically.

D-Link’s Connection Manager software is also freely provided.

DWM-222 4G LTE USB Adapter is small to carry around and features a microSD card reader for optional removable storage, up to 32 GB. No batteries, cables, or additional hardware is required.

Key features of DWM-222:

There is an integrated SIM card slot and 4G LTE with up to 150 Mbps download. It also supports LTE Bands: B1/ B3/ B7/ B28/ B40 and UMTS Bands: B1/ B8.

The interface is USB 2.0 with microSD card for storage expansion and compatible with Windows 7/ 8/10 and MacOS 10.15 or higher. The SIM adapter is included in the box for easy installation.

DWR 933

Meanwhile with the D-Link’s new DWR-933 your own 4G hotspot can be created anywhere.

The high-speed portable mobile Wi-Fi hotspot is shared with several devices, like laptops, tablets and phones. In fact you can connect up to 32 Wi-Fi devices anywhere, with fast 4G LTE speeds.

Its reliable, long-lasting battery also means your private 4G LTE hotspot lasts up to 14 hours between charges.

The DWR-933 is conveniently unlocked so will take any USIM or micro-SIM card and CAT6 LTE technology provides rapid download speeds of up to 300Mbps, upload speeds up to 50 Mbps, and you also get 1200 Mbps combined speeds over Wi-Fi by using two dedicated Wi-Fi bands, so you can take full advantage of your carrier’s 4G broadband.

In terms of storage capacity, you can easily share up to 64GB of files by using the built-in micro-SD card slot (card not included).

The DWR-933 sports Wi-Fi Protected Setup (WPS) which means adding a new WPS device to your Wi-Fi network is easy, you simply tap the WPS button, followed by the WPS button on your new device, and you’re connected.

It’s also easy to charge the DWR-933 by connecting it directly to your computer’s USB port via the supplied USB Type-A to Micro-Type-A cable.

The DWR-933 also provides a built-in firewall for a safer and more secure network.

It’s always protected with a customisable password, so you can share your private hotspot only with people you trust.

The active firewall helps keep your network safe, while using WPA/WPA2 Wi-Fi encryption ensures your traffic is always protected against eavesdropping and unauthorised access.

In short the DWR-933 enables instant connectivity anywhere there is a mobile signal.

This small and portable device weighs only 120g, and the round-edged design smoothly fits into pockets and laptop bags whilst the OLED screen gives you important information including signal strength, roaming status, carrier, number of clients, and battery status at a glance.

Key Features- DWR-933:

There is built-in SIM card slot to share your high-speed mobile Internet connection and Cat 6 LTE-A delivering speeds of up to 300 Mbps.

It is compatible with 802.11ac/n/g/b devices and 3000 mAh battery for all-day (up to 32 devices) connectivity.

It has WPA/WPA2 wireless encryption and one-touch setup with Wi-Fi Protected Setup (WPS).


D-Link -

Related news & editorials

  1. 22.09.2021
    by      In
    Leussink, the exclusive Australian distributor of Demmeler 3D Welding table solutions, has expanded its range with the new Demmeler WeldSpace system, a fully equipped welding cell with a built-in welding cobot.
    Leussink’s Managing Director Jason Leussink says the new Demmeler WeldSpace system is... Read More
  2. 22.09.2021
    by      In
    In a $600,000 research partnership between AML3D Limited and Deakin University, supported through the Innovative Manufacturing Cooperative Research Centre (IMCRC), experts are developing high strength aluminium – scandium welding wire for Wire Additive Manufacturing (WAM®) applications.
    AML3D, a... Read More
  3. 22.09.2021
    by      In
    New Elesa stainless steel hinges in AISI 304 grade join the company’s existing ranges in both 304 and 316 grades, offering high strength for heavy doors as well as excellent corrosion resistance.
    These are especially suited to enclosure installations in arduous environments, such as pharmaceutical... Read More
  4. 20.09.2021
    by      In
    Lateral restraint blocks made of an engineering plastic that typically retains most of its strength over 100 years are being produced by Hercules Engineering to safeguard suburban and highway concrete bridges against earthquakes and radical structural movement.
    The custom-fabricated high density... Read More